MTD 607 Operation, Safety Interlock Switches, Setting the Cutting Height, Starting the Engine

Page 11

SECTION 8: OPERATION

SAFETY INTERLOCK SWITCHES

This tractor is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the tractor. Contact an authorized dealer in your area. The safety interlock system prevents the engine from cranking or starting unless the brake pedal is fully depressed, and the PTO lever is in the disengaged (OFF) position.

•The safety interlock system will automatically shut off the engine if the operator leaves the seat before engaging the brake lock.

•The safety interlock system will automatically shut off the engine if the operator leaves the seat with the PTO lever in the engaged (ON) position, regardless of whether the brake lock is engaged. The PTO lever must be in the disengaged (OFF) position to restart the engine.

•The safety interlock system will automatically shut off the engine if the PTO lever is moved into the engaged (ON) position with the shift lever in the REVERSE position.

WARNING: Do NOT attempt to bypass or disconnect the tractor’s safety interlock. Doing so could result in serious personal injury or death.

IMPORTANT: Tampering with or attempting to bypass the tractors Safety Interlock Switches in any way WILL void your warranty.

WARNING

AVOID SERIOUS INJURY OR DEATH

•GO UP AND DOWN SLOPES, NOT ACROSS.

•AVOID SUDDEN TURNS.

•DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP.

•IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY.

•DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

•NEVER CARRY CHILDREN.

•LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.

•KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN PLACE AND WORKING.

•REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).

•KNOW LOCATION AND FUNCTION OF ALL CONTROLS.

•BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLAC- ING HANDS OR FEET NEAR BLADE(S).

•BEFORE LEAVING OPERATOR’S POSITION, DISENGAGE BLADE(S), PLACE THE SHIFT LEVER IN NEUTRAL, ENGAGE BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.

READ OPERATOR’S MANUAL

SETTING THE CUTTING HEIGHT

Select the height position of the cutting deck by placing the deck lift lever in any of the six different cutting height notches on the right side of the fender. Then adjust the deck wheels so that they are at least 1/4 inch to 1/2 inch above the ground when the tractor is on a smooth, flat surface such as a driveway.

WARNING: Keep hands and feet away from the discharge chute opening of the cutting deck.

NOTE: The deck wheels are an anti-scalp feature of the deck and are not designed to support the weight of the cutting deck.

Refer to the ADJUSTMENTS section of this manual for more detailed instructions regarding various deck adjustments.

STARTING THE ENGINE

NOTE: Refer to the TRACTOR SET-UPsection of this manual for gasoline and oil fill-up instructions.

•Insert the tractor key into the ignition switch.

•Place the PTO lever in the disengaged (OFF) position.

•Depress the brake pedal and set the parking brake.

•Place the shift lever in the NEUTRAL position.

•Move the throttle control lever into the FAST (or CHOKE, if so equipped) position.

•Pull out the choke control knob, if so equipped (a warm engine may not require choking).

•Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the ON position.

IMPORTANT: Do NOT hold the key in the START position for longer than ten seconds at a time. Doing so may cause damage to your engine’s starter.

NOTE: If starting problems are encountered, refer to the TROUBLESHOOTING section of this manual.

After the engine starts, slowly release the brake pedal. As the engine warms up, gradually push the choke control knob inward (or move the throttle control lever out of the CHOKE position) to open up the choke plate on the engine’s carburetor.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Important Read Safety Rules and Instructions CarefullyCalling Customer Support Table of ContentsFinding Your Model Number MTD Products INCGeneral Operation Important Safe Operation PracticesChildren ServiceSlope Operation Do notSafety Labels found on your unit USE this page AS a Guide to Slope GaugeGAS and OIL FILL-UP Attachments & AccessoriesAttaching the Battery Cables Tractor SET-UPControls Choke Control Ignition SwitchSystems Indicator Monitor Throttle Control LeverParking Brake Button PTO Power TAKE-OFF LeverLift Lever Drive PedalStarting the Engine Safety Interlock SwitchesSetting the Cutting Height OperationOperating the Headlights Stopping the EngineDriving the Tractor Driving on SlopesMowing AdjustmentsUsing the Lift Lever Engaging the PTO Power TAKE-OFF LeverFront to Rear Side to Side Seat AdjustmentSide to Side Steering Adjustment Brake AdjustmentEngine MaintenanceCarburetor Adjustment Cleaning the Engine and DeckFront of Tractor Cutting Deck RemovalLift Inch decks Changing the Deck BeltsUpper Drive Belt Changing the Transmission Drive BeltsLower Drive Belt Cutting Blades Lubrication Trouble Possible Corrective Action Causes Troubleshooting GuidePart Description Models 607, 608Green Blue Electrical SystemModels 607 Tractor Body Model Dash Panel Models 607, 608 Lift Assembly 3126 Steering Assembly 4413 Drive System 31 30 12c Single-speed Transmission Hook spring, Ref , here PTO belt for 42 deck shown Power Take-off System Inch Deck Brake Assembly Cutting Decks Briggs & Stratton OHV V-Twin Briggs & Stratton Opposed Twin Engine AccessoriesMANUFACTURER’S Limited Warranty

607 specifications

The MTD 607 is an advanced piece of machinery designed for a variety of agricultural and landscaping applications. Known for its robust performance and durability, the MTD 607 stands out due to its careful engineering and innovative technologies that cater to the needs of modern users.

One of the key features of the MTD 607 is its powerful engine. This model typically boasts an engine with high torque output, providing the necessary strength for tackling tough terrain and dense vegetation. This allows users to perform a wide range of tasks, from mowing larger areas to managing challenging landscapes efficiently. Its engine is not only powerful but also designed to be fuel-efficient, ensuring that users can rely on the machine for extended periods without frequent refueling.

The MTD 607 incorporates cutting-edge technology to enhance user experience and improve productivity. For instance, it features an intuitive control panel that puts all necessary functions at the operator's fingertips. This means operators can easily adjust settings, monitor performance, and manage tasks without having to navigate through complicated systems. Additionally, some models include digital displays that provide real-time feedback regarding speed, operating hours, and maintenance requirements, ensuring optimal performance at all times.

Comfort is another important aspect of the MTD 607. The design prioritizes ergonomic features, featuring adjustable seats and easy-access controls that cater to users of all sizes. This focus on comfort helps reduce fatigue during prolonged use, allowing operators to work more efficiently over longer periods. Moreover, the MTD 607 is built with a sturdy frame and reinforced components that contribute to its longevity, making it a reliable choice for both commercial and residential users.

Safety is paramount in the design of the MTD 607. It includes multiple safety features such as automatic shut-off mechanisms, reinforced guards, and intuitive braking systems. These features work together to provide peace of mind for operators, ensuring safe operation even in challenging conditions.

In conclusion, the MTD 607 is a versatile and powerful machine with a range of features that make it suitable for various applications in agriculture and landscaping. From robust engines and user-friendly technology to ergonomic designs and safety enhancements, it provides an excellent solution for those seeking efficiency and reliability in their outdoor tasks. Whether for professional landscaping services or personal gardening efforts, the MTD 607 is a worthy investment for enhancing productivity and achieving excellent results.
Top Page Image Contents