Meridian America 588 manual To connect to other Meridian 500 Series equipment

Page 27

To connect to other Meridian 500 Series equipment

This is the unit that will respond to the remote.

All the other units will be configured

● Connect one of the COMMS sockets on the back panel of the

compact disc player to one of the COMMS sockets on

as non-controllers, and display:

N.Con.

up the compact disc player

another 500 Series unit, using the 500 comms lead provided.

The sequence in which you connect the units is not important.

588 CD Player	500 Series unit
COMMS	COMMS

Then configure the units with the following automatic setup procedure:

●Switch all the units to standby.

●Press Clear (remote).

Your system is now set up and ready for use.

●If for any reason the automatic setup does not give the configuration you want, restore the default operation by selecting the standard type; see Choosing standard settings, page 26.

Note: Do not, under any circumstances, connect any equipment other than Meridian 500 or 800 Series to the socket marked COMMS on the back of the compact disc player.

Setting

Each unit will display:

Auto

One unit will then be designated

as the controller, and display:

Con.

22

Image 27

Contents Meridian 588 Compact Disc Player Meridian Compact Disc Player User Guide Sales and service in the UK Contents Troubleshooting Configuring the compact Disc playerIntroduction Professional features Meridian 500 SeriesSeries communications Analogue controller Digital Control Unit Sample configurationsMeridian Digital Music System Specification Specification and accessoriesAvailable accessories Using the compact disc player Front panel To insert a disc Switching on and offTo switch on from standby To switch to standbyTo play the disc Playing a discTo move to the next track To play starting from a particular trackTo pause play Stopping and pausing playTo continue after pausing To stop playTo repeat between two positions To cancel A-B repeatTo cancel the repeat function Repeating playProgramming a selection To programme by storing the tracks you want to playTo choose a track to programme To add a track to a selection To programme by clearing the tracks you do not want to playTo remove a track from a selection To clear a programmeTo scan through a disc Disc information and scanningTo change the display Scanning a discChanging the absolute phase To display the phase settingTo change the phase setting Setting up the compact disc player Radio interference UnpackingTo avoid overheating Safety warningsPositioning the compact disc player To avoid interferenceConnecting the compact disc player Back panelAudio connections Comms Communications connectionsUp the compact disc player To connect to other Meridian 500 Series equipmentConnecting audio To connect to Meridian DSP loudspeakers Configuring the compact disc player To restore the standard settings Choosing standard settingsSpecifying information about your system To configure the compact disc playerConfiguring the compact disc player Troubleshooting Troubleshooting No lights are displayed when switching onThere is no sound when playing a disc Single key press on the remote causes multiple entries Display shows No disc when attempting to play a discCreating MP3 discs To clean the audio connections MaintenanceCleaning To clean the case, display panel, and keypadService and guarantee ServiceGuarantee Continuing play Digital output 21 disc information IndexPhase