OPERATION
Operation
CAUTION
Make sure to follow all safety rules referenced in the safety sectionofthismanualbeforeoperatingcompactor. Keepwork area clear of debris and other objects that could cause damage to the compactor or bodily injury.
1.Once the engine has started, move the engine throttle lever quickly to the fast position.
2.With the throttle lever in the fast position, the engine speed should be around 2,300 RPM, therefore engaging the cen- trifugal clutch.
NOTICE
Always move the throttle lever quickly without hesitation, because increasing the engine speed slowly causes the clutch to slip.
5.Firmlygaspthecompactor'shandlebar withbothhands,the compactor will begin moving forward.
6.Slowly walk behind the compactor and be on the lookout for anylargeobjectsorforeignmatterthatmightcausedamage to the compactor or bodily injury.
7.Compactortravelingspeedmaydroponsoilswhichcontain clay, however there may be cases where traveling speed drops because the compaction plate does not leave the ground surface easily due to the composition of the soil.To rectify this problem do the following:
Check the bottom plate to see if clay or equivalent material has been lodge in the plate mechanism. If so, wash with water and remove.
Remember the compactor does not work as efficiently on clay or soils that have a high moisture content level.
If the soil has a high moisture level, dry soil to appropriate moisture content level or carry out compaction twice.
MVC77 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #4 (1/14/11) — PAGE 19