Multiquip SP1CE13H18 Saw Transportation Safety, Machine Operation And Safety Decals, Emergencies

MQ STREET PRO 1 CE SAW — RULES FOR SAFE OPERATION

Saw Transportation Safety

■ DO NOT use the handle bars and/or front pointer as lifting

points.

■ ALWAYS use ramps capable of supporting the weight of the

saw and the operator to load and unload the saw. If the saw

must be lifted, always use two people. Never attempt to lift

the saw by yourself.

■ NEVER attempt to tow the untrailered saw behind a vehicle.

■ DO NOT use on slopes or on extremely uneven surfaces.

■ NEVER tip the engine to extreme angles as it may cause oil

to gravitate into the cylinder head making the engine start

difficult.

■ NEVER transport the saw to or from the job site with the

Machine Operation And Safety Decals

The SP 1 saw is equipped with a number of operation and safety decals. (Figure 1) Should any of these decals become unreadable, replacements can be obtained from your dealer.

	WARNING
TO PREVENT SERIOUS INJURY
	DO NOT OPERATE SAW
	WITHOUT PROPER TRAINING
	& FULL UNDERSTANDING
	OF THE OWNERS MANUAL
WHEN OPERATING THIS MACHINE
	KEEP ALL
	GUARDS IN
	PLACE
ALWAYS WEAR SAFETY APPROVED
	HEARING
	PROTECTION
	EYE OR FACE
	PROTECTION
P/N 25782	HEAD
	PROTECTION
P/N 35137	RESPIRATOR
SMI	MASONRY AND CONCRETE
SAW MANUFACTURING INSTITUTE

blade mounted.

EMERGENCIES

■ ALWAYS know the location

of the nearest fire

extinguisher.

P/N 25867

P/N 22122-001

P/N 35158

■ ALWAYS know the location of the

nearest first aid kit.

■ In emergencies always know the location of the

nearest phone or keep a phone on the job site.

Also know the phone numbers of the nearest

ambulance, doctor, and fire department. This

information will be invaluable in the case of an

emergency.

Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:

Leadfromlead-basedpaints.

Crystallinesilicafrombricks.

Cementandothermasonryproducts.

Arsenicandchromiumfromchemically

treatedlumber.

Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

P/N 20525

CAUTION

When Larger Blade and Guard is Installed, Belt Drive MUST Be Changed to Proper Size. See Owners Manual.

FAILURE TO COMPLY WITH THE C C AH JADV EEE AV EEA OIEJGGVCBVVZ

S.M.I. MASONRY AND CONCRETE

SAW MANUFACTURER’S INSTITUTE

P/N 23330-001

MODEL

SERIAL NO.

CONTACT

SERVICE DEPARTMENT

P/N 11092

P/N 36099 (ISO Blue)

P/N 35167

WARNING!WARNING!

			KEEP FEET					KEEP HANDS
				CLEAR				CLEAR
P/N 25250-001							P/N 25249-001
			TATI		O
	O
R					N
P/N 25491
			TATI
		O			O
R						N
P/N 25678							P/N 25783

OW P

DER

C O

ATED

P/N 13118	P/N 11246
	(Sheet-Intl. Stds)
	Figure 1. SP 1 Decals

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 11