MQ STREET PRO 1 CE SAW — RULES FOR SAFE OPERATION
RULES FOR SAFE OPERATION
WARNING
Failure to follow instructions in this manual may lead to serious injury or even death!This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.
The following safety guidelines should always be used when operating the SP 1.
SAFETY
■ DO NOT operate or service this equipment before reading this entire manual. The manualmustbekeptavailableandaccessible totheoperator.
■This equipment should not be operated by persons under the minimum statutory age limit.
■NEVER use this machine for any purpose other than those described in this manual.
■NEVER operate the saw without proper protective clothing, shatterproof glasses,
■NEVER use accessories or attachments which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.
■Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties. Any modification which could lead to a change in the original characteristics of the machine should be made only by the manufacturer who shall confirm that the machine is in conformity with appropriate safety regulations.
■NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
■NEVERoperatethesawunder the influence or drugs or alcohol.
■Replace nameplate, operation and safety decals when they become difficult to read.
■ALWAYS check the saw for loosened hardware such as nuts and bolts before starting.
■NEVERtouchthehotexhaustmanifold,muffler or cylinder. Allow these parts to cool before servicing the saw.
■HighTemperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot! components can cause serious burns.
■The engine of this saw requires an adequate free flow of cooling air. NEVER operate the saw in any enclosed or narrow
area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the saw's engine and may cause injury to people. Remember the saw's engine gives off DEADLY carbon monoxide gas.
■ALWAYS refuel in a
■ALWAYS use extreme caution when working with flammable liquids. When refueling, STOP the engine and allow it to cool.
■NEVER operate the saw in an explosive atmosphere where fumes are present, or near combustible materials. An explosion or fire could result in severe bodily harm or even death.
■NEVER smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot! engine.
■
■NEVER use fuel as a cleaning agent.
SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 9