Multiquip SP1CE13H18 manual MQ Street PRO 1 CE SAW Controls & Components

MQ STREET PRO 1 CE SAW — CONTROLS & COMPONENTS

CONTROLS & COMPONENTS

Figures 4 shows the location of the basic controls or components for the SP 1. Listed below is a brief explanation of each control or component.

1.Hand Grips/Handlebar – When operating the saw, place both hands on each grip to maneuver the saw. Replace hand grips when they become worn or damaged.

2.Handle Lock – Lock blade depth to desired position.

3.Garden Hose Connecter – Connect to water source to provide blade cooling while cutting concrete or asphalt.

4.Air Filter – Prevents dirt and debris from entering the engine air intake. Check filter periodically and replace when necessary.

5.Recoil Starter Handle – Pull to engage and start the engine.

6.Recoil Starter Assembly – Engages the engine when the handle is pulled and rewinds the starter rope when the handle is released.

7.Wheels/Carriage Assembly – Heavy-duty wheels with permanently sealed ball bearings.

8.Cutting Blade – Use appropriate type blades for cutting concrete or asphalt.

9.Blade Guard – Covers saw blade and flips up to allow blade to be changed.

10.BeltTension Adjuster – Adjusts belt tension.

11.Front Pointer – Front pointer wheel assists in straight tracking.

12.Front Pointer Arm – Stows up for storage and pivots down for use.

13.Cutting Depth Adjuster – turn operating crank clockwise or counter-clockwise to adjust the cutting depth up or down.

14.FuelTank – Use unleaded gasoline. Do not overfill.

15.Blade Coolant System – Provides cooling water to blade during cutting operations.

16.V-Belt Cover – Remove this cover to gain access to the V- belts. NEVER operate the saw with this cover removed.

17.Spindle Grease Zerks – Conveniently located for lubrication.

18.On/Off Switch (On Engine) – Turn to the "ON" position to allow engine to be started and turn to the "OFF" position to shut the engine off.

19.Tool Rotation – Rotational direction of tool (blade) during operation.

20.Engine Stop Switch (On Handlebar) – Toggle in either direction to stop the engine.

21.Wheel Clamp – Move handle down making contact with wheel to avoid unwanted rolling movement. Lift handle to release.

22.WaterValve – Rotate handle to turn water supply on or off.

Figure 4. SP 1 Components

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 15