MQ Street PRO 1 CE SAW Blades | Multiquip SP1CE13H18 guide

MQ STREET PRO 1 CE SAW — BLADES

SPECIFICTOOLSTO BE USED

This saw is to use tools (blades) as follows:

Steel Core Segmented or Continuous Diamond Rim Cutting Wheel.

Any other type of tool is not to be used. See Table 4 for specific blade usage for material.

WARNING

Failure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blade or the saw, and may cause injury to the user or others in the operating area. Discard damaged or worn blades and replace with fresh blade.

Figure 11. Diamond Blade

1.	Drive Pin Hole – A commonly located hole on the diamond
	blade core that prevents operational blade slippage
	between the inner & outer blade flanges (collars). Inspect
	the diameter of the hole to ensure there is no distortion,
	and that a snug fit develops between the hole and drive
	pin.
2.	Stress Relief Holes (Gullets) – Check the steel core for
	cracks that may have propagated from the slots and/or
	gullets. Cracks indicate extreme fatigue failure and if sawing
	continues, catastrophic failure will occur.
3.	Edge Of The Steel Core – Check the diameter edge for
	discoloration (blue oxidation) indicating an overheating
	condition caused by insufficient cooling water/air.
	Overheating of blades may lead to loss of core tension
	and/or increase the possibility for blade failure. Check to
	make sure the steel core’s width is uniform about the rim of
	the blade, and not succumbing to an “under cutting”
	condition brought about by highly abrasive material or
	improper under cutting core protection.

4. Directional Arrow – Check to ensure that the blade is oriented properly on the spindle for sawing. Reference the directional arrow on the blade and place it so the direction

	of rotation “downcuts” with the turn of the shaft.
5.	Diamond Segment or Rim – Ensure there are no cracks,
	dings, or missing portions of the diamond segment/rim. DO
	NOT use a blade that is missing a segment or a portion
	of the rim. Damaged and/or missing segments/rims may
	cause damage to your saw, and injury to the user or others
	in the operating area.
6.	Specifications – Ensure that the blade specifications, size,
	and diameter properly match up to the sawing operation.
	Wet blades must have water to act as a coolant. Utilizing a
	diamond blade not matched properly to the task may result
	in poor performance and/or blade damage.
7.	Arbor Hole – It is essential that the arbor hole diameter
	properly matches the shaft arbor, and that it is free from
	distortions. Correct blade flanges (collars) must be used.
	The inside face of the flanges must be clean & free of debris.
	An out of round arbor condition will cause damage to the
	blade and the saw.

8. MAX RPM – This RPM reference is the maximum safe operating speed for the blade selected. NEVER exceed the max RPM on the diamond blade. Exceeding the MAX RPM is dangerous, and may cause poor performance and may damage the blade. All blades used must be designed for the maximum spindle RPM.

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 19

SP1CE13H18 specifications

The Multiquip SP1CE13H18 is a robust and highly efficient concrete saw designed for both professional and industrial applications. Its state-of-the-art features make it a preferred choice among contractors for cutting through tough materials like asphalt, concrete, and stone.

One of the standout characteristics of the SP1CE13H18 is its powerful engine. Equipped with a reliable Honda GX390 gasoline engine, this concrete saw delivers an impressive output, ensuring optimal performance even in demanding situations. The engine's high torque allows operators to execute deep cuts with ease, making it suitable for heavy-duty sawing tasks.

The design of the SP1CE13H18 emphasizes user convenience and safety. Its ergonomic handle is adjustable, allowing for comfortable operation over extended periods. The saw's vibration-reducing technology minimizes hand fatigue, enabling users to maintain precision without sacrificing comfort. Additionally, the unit comes equipped with an integrated water delivery system, which not only helps in cooling the blade but also reduces dust during operation, enhancing job site safety and compliance with regulations.

Another noteworthy feature is the saw’s blade guard. Designed for easy adjustment, it accommodates various blade sizes, offering versatility for different cutting depths. With a maximum cutting depth of 6 inches, the SP1CE13H18 is capable of handling a wide range of projects, from small repair jobs to large construction sites.

The portability of the Multiquip SP1CE13H18 is another key aspect. The saw features a lightweight frame enhanced by durable materials, allowing for easy transport between job sites. Its compact size also means it can be stored conveniently when not in use.

In terms of maintenance, the SP1CE13H18 is designed for efficiency. Easy access to its components ensures that users can perform routine checks and replacements without hassle. This low-maintenance requirement keeps downtime to a minimum, ensuring that projects stay on schedule.

In summary, the Multiquip SP1CE13H18 concrete saw stands out with its powerful Honda engine, ergonomic design, user-friendly features, and impressive cutting capabilities. Its blend of performance, safety, and ease of maintenance makes it an excellent choice for contractors looking for reliability and efficiency in their concrete cutting tools. Whether for professional construction jobs or demanding industrial applications, the SP1CE13H18 meets and exceeds user expectations, making cutting tasks easier and more efficient.