Guards And Covers, Belt Check | Multiquip SP1CE13H18 specs

MQ STREET PRO 1 CE SAW — PREPARATION/PRE-INSPECTION

Guards And Covers

WARNING

NEVER operate the saw without blade guards and covers in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operation. Adhere to the safety guidelines or other applicable local regulations.

Figure 8. Blade Guard

CHECK the following on the blade guard (Figure 8):

■Ensure the capacity of the blade guard is correct for an 18" Diamond Blade.

■Check that the guard is bolted firmly upon the saw frame.

■Check that the spring tensioned front cover of the guard is firmly seated with the rear section of the guard and there are no gaps. NEVER lift the blade guard while engine is running.

ENSURE the V-belt Cover is in place and securely fastened during operation of the saw (Figure 8).

V-Belt Check

A worn or damaged V-belt can adversely affect the performance of the saw. If a V-belt is defective or worn, replace ALL the V- belts. V-belts should always be replaced in sets.

WARNING

NEVER attempt to check theV-belt with the engine running. Severe injury can occur. Keep fingers, hands, hair, and clothing away from all moving parts.

V-belt Alignment and Tensioning

This saw is equipped with premium V-belts that have been aligned and tensioned by factory personnel. The V-belt must be aligned and tensioned for proper operation of the saw.

Use the following procedure to check the alignment of V-belt:

1.Remove the bolts that secure the V-belt cover (Figure 9) to the saw frame.

Figure 9. V-Belt Cover

2.Check uniform parallelism (Figure 10) of V-belt and pulley (sheaves). Use a straight-edge or machinist's square against both pulleys and adjust both pulleys until equally aligned.

Figure 10. Pulley Alignment

3.Check V-belt tension by using a tension meter (3.0 lbs./ 1.36Kg) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/16" (5 mm).

4.DO NOT over or under tighten the V-belt. Severe damage can occur to the saw and engine crankshaft if the belt is over-tensioned. A decrease of power to the blade and poor performance will result if the belt is under-tensioned (loose on pulleys).

	NOTE	V-belt alignment must be rechecked after
	NOTE	adjusting belt tension.
		adjusting belt tension.

PAGE 18 — SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08)

SP1CE13H18 specifications

The Multiquip SP1CE13H18 is a robust and highly efficient concrete saw designed for both professional and industrial applications. Its state-of-the-art features make it a preferred choice among contractors for cutting through tough materials like asphalt, concrete, and stone.

One of the standout characteristics of the SP1CE13H18 is its powerful engine. Equipped with a reliable Honda GX390 gasoline engine, this concrete saw delivers an impressive output, ensuring optimal performance even in demanding situations. The engine's high torque allows operators to execute deep cuts with ease, making it suitable for heavy-duty sawing tasks.

The design of the SP1CE13H18 emphasizes user convenience and safety. Its ergonomic handle is adjustable, allowing for comfortable operation over extended periods. The saw's vibration-reducing technology minimizes hand fatigue, enabling users to maintain precision without sacrificing comfort. Additionally, the unit comes equipped with an integrated water delivery system, which not only helps in cooling the blade but also reduces dust during operation, enhancing job site safety and compliance with regulations.

Another noteworthy feature is the saw’s blade guard. Designed for easy adjustment, it accommodates various blade sizes, offering versatility for different cutting depths. With a maximum cutting depth of 6 inches, the SP1CE13H18 is capable of handling a wide range of projects, from small repair jobs to large construction sites.

The portability of the Multiquip SP1CE13H18 is another key aspect. The saw features a lightweight frame enhanced by durable materials, allowing for easy transport between job sites. Its compact size also means it can be stored conveniently when not in use.

In terms of maintenance, the SP1CE13H18 is designed for efficiency. Easy access to its components ensures that users can perform routine checks and replacements without hassle. This low-maintenance requirement keeps downtime to a minimum, ensuring that projects stay on schedule.

In summary, the Multiquip SP1CE13H18 concrete saw stands out with its powerful Honda engine, ergonomic design, user-friendly features, and impressive cutting capabilities. Its blend of performance, safety, and ease of maintenance makes it an excellent choice for contractors looking for reliability and efficiency in their concrete cutting tools. Whether for professional construction jobs or demanding industrial applications, the SP1CE13H18 meets and exceeds user expectations, making cutting tasks easier and more efficient.