48COIL IDENTIFICATION
The
Standard (7.5kHz)
ERROR MESSAGES 49
Coil Unplugged |
The coil is not connected to the detector.
This frequency is most suitable for general detecting for most ground conditions. These coils have a black serial number label starting with the letter M.
Low (3kHz)
This frequency is more suited to searching for larger, deeper targets,
High (18.75kHz)
This frequency is more suited to searching for smaller shallow targets and low conductivity targets (e.g. hammered coins, fine jewellery). These coils have a white serial number label starting with H.
To view the type of coil:
Press MENU SELECT to enter the settings screen.
Press and hold ACCEPT REJECT to view the coil identification screen.
Release ACCEPT REJECT to return to settings.
Press PINPOINT to return to detection.
Press and hold
Concentric
Standard
Frequency
Concentric
Low
Frequency
Concentric
High
Frequency
Double D
Standard
Frequency
Double D
Low
Frequency
Double D
High
Frequency
Coil Error
The coil is not communicating with the control box.
Coil Incompatible
The coil is communicating with the control box but the detector is not recognising it.
The circular scale line icon will slowly flash until a suitable coil is connected.
Overload
The detector has received a signal that is too strong for it to interpret. The letters OL will appear until signal is no longer too large (pg. 12).
Release
The
Once all errors are resolved, the detector will begin operation with a blank detection screen.