Minelab 4901 - 0059 quick start Care of Your X-TERRA, Terra 70 Specifications, Model Features

52CARE OF YOUR X-TERRA 70

The X-Terra 70 is a high quality electronic instrument, finely engineered and packaged in a durable housing. Taking proper care of your X-Terra 70 is common sense.

	X-TERRA 70 SPECIFICATIONS 53
Transmission	Single Frequency Sine Wave
Technology	VFLEX
Coil	9” Concentric 7.5 kHz
Visual Display	Positive Reflective LCD
Audio	Internal Speaker and Headphone Output
Search Mode	Motion Detector
Discrimination	Multi-Segment Accept/Reject/Iron Mask

The storage temperature of the X-Terra 70 is -4˚F to 149˚F (-20˚C to +65˚C) and the operating temperature is 32˚F to 113˚F (0˚C to 45˚C). Do not leave the detector in excessive heat or cold for longer than necessary.

The coil can be submerged in water up to 20” (0.5m), but the control box is not waterproof. Although it has been designed to be weather resistant, it is advisable to protect the control box in wet conditions. A protective control box cover is available (Accessories, pg. 51).

Never allow the detector to come into contact with gasoline or other petroleum-based liquids.

Keep the detector clean and dry and avoid getting sand and grit into the shafts or fastenings (e.g. yoke, twistlocks). Do not use solvents to clean the detector. Use a damp cloth with mild soap detergent.

Always remember to turn the detector off before changing coils.

Coils from other models of Minelab detectors will not function with the X-Terra 70 (Accessories, pg. 51).

Only VFLEX compatible coils will operate correctly with the X-Terra detectors (Coil Identification, pg. 48).

The display window may be prone to scratching or damage if not treated with care. A protective control box cover is available

(Accessories, pg. 51).

Ensure that the coil cable is in good condition and not subject to undue stress, particularly where it is connected to the coil.

Old, flat, or faulty batteries can cause many problems with the detector, through electrolyte leakage. Take the batteries out if the detector will be unused for more than 1 week. Ensure that only good quality batteries are used and that they are replaced when the low battery signal sounds.

Do not use rechargeable Lithium Ion batteries as their voltage is too high. Non-rechargeable Lithium batteries may be used.

Batteries (Not Included)	4 x AA Alkaline/Carbon/Lithium or NiMH/NiCad
Padded Armrest	4 Position Adjustable with Stand & Armrest
Length Extended		56” (1.42m)
Length Unextended		48” (1.22m)
Weight (Excluding Batteries)		2.9lbs (1.3kg)
Optional Accessories	Headphones, Skidplates, Environmental Cover,
		Coils, Short Shaft
Patents		Pending
		Model Features
Coil Frequency Options	3 (Standard 7.5 kHz, Low 3kHz, High 18.75 kHz)
Detecting Modes		Coin & Treasure, Prospecting
Discrimination Patterns		3 + All Metal
Iron Mask Discrimination (Prospecting Mode)		0 to 20
All Metal Shortcut
Discrimination Scale (Segments)		28
Ferrous		4
Non-ferrous		24
Numeric Range (Target ID Numbers)		Steps of 2 (-8, -4, -2, 0, 2, 4, 6, 8, 10, 12,
		14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34,
		36, 38, 40, 42, 44, 46, 48)
Depth		Maximised
Depth Indication Icons		5
Sensitivity Adjustment		Manual, 1 to 30
Noise Cancel Channels		5 (-2, -1, 0, 1, 2), Auto
Ground Balance Adjustment		Manual 1-90, Auto, Track, Beach
Pinpoint (Audio & Visual)
Volume Adjustment		0 to 30
Threshold Adjustment		–5 to 25
Audio Tones for Targets		1, 2, 3, 4, Multiple
Low Battery Audio Alarm
User Interface Keys		10 + Power
LCD Icons		82
Shaft Colour		Dulux Notre Dame 36672

In the interests of product improvement,

Minelab reserves the right to make changes without notice.