Instructions,CAREOperation& CLEANINGand Directions for Use
Getting Started
Before you use the ClearWave® Phototherapy System, you will need to install the battery (see page 21 - How to replace the battery) and fully charge the device. It takes approximately 12 hours to fully charge the battery for the first time.
Step 1 |
Step 1 Connect the power adapter to the Charging Stand and the adapter into a 110 VAC grounded electrical outlet.
Step 2
Step 2 Place the ClearWave Phototherapy System for Acne on the Charging Stand as shown.
Step 3 The battery life indicator lights will provide information to you on the status while charging.
Step 3
Step 4
Step 4 When all 3 battery indicator lights are illuminated, the battery is fully charged and the device is ready for use. Once fully charged, the indicator lights will illuminate for 3 minutes, and then turn off.
16