Instructions, Operation and Directions for Use — continued
Checking the Status of the Clearwave® Device
Step 1 Be sure the device is turned off. To place the device into status mode, press and quickly release the power button. The device will remain in status mode for approximately 30 seconds.
Step 2 The battery life indicator displays the respective status of battery charge levels. The display will show the number of cycles remaining on the Treatment Head.
Step 3 When 30 seconds have elapsed, the device will shut off.
f.
b.
a.
c.
d. |
e.
Controls
a.Power Button
b.Head Latch Buttons
Status Indicators c.Information Display d.Battery Life Indicator Lights
e.Treatment Head Life Indicator Lights f. 32 LED Lamps
Information Display Indicators
Display | Mode | Explanation | Reference |
|
|
|
|
Number | Operating | Time remaining on current treatment cycle | See Page 18 |
|
|
|
|
Number | Idle | Number of treatment cycles remaining on head | See Page 19 or 20 |
|
|
|
|
0 | Idle | Treatment Head is exhausted | See Page 20 |
|
|
|
|
- - - |
| Treament Head is not correctly attached | See Page 20 |
|
|
|
|
LO |
| Battery is low | See Page 21 |
|
|
|
|
HP |
| Device requires cooling | See Page 22 |
|
|
|
|
CP |
| Device is too cold to operate | See Page 22 |
|
|
|
|
Treatment Head Life Indicator and Battery Life Indicator
| Treatment Head Life Indicator Light | Battery Life Indicator Light |
|
|
|
|
| ||
|
|
| ||
|
|
|
|
|
3 lights | More than 75 treatments remaining | More than 75% of the battery is charged | ||
|
|
|
|
|
2 lights | Between 75 and 25 treatments remaining | 25% to 75% of the battery is charged | ||
|
|
|
|
|
1 light | Fewer than 25 treatments | Less than 25% of the battery is charged | ||
|
|
|
|
|
Flashing light | Head needs to be replaced | Battery needs to be charged | ||
|
|
|
|
|
19