Verilux CW01 manual Interrupted Treatment, Device to skin in 30 seconds, the device will shut off

Page 18

Instructions, Operation and Directions for Use — continued

Step 5

Step 5 Place the device against the desired treatment area of your skin. The treatment lights will automatically turn on once in contact with the skin. This indicates that the treatment cycle is beginning.

Step 6 Hold the device in place until the device beeps 2 times, indicating the completion of a 3-minute treatment cycle.

Step 7 For each additional location to be treated, press the button until it beeps once, place the device against the new area and the light will again illuminate signifying the beginning of the next 3-minute treatment cycle.

Notes: • Treat only one area per treatment cycle.

Your daily treatment regime should not exceed three treatment cycles per location.

A second consecutive treatment to the same area may be performed.

Waiting a short time between treatment cycles is suggested to prevent the device from entering heat protection mode.

Interrupted Treatment

Note: You can continue treatment of the same area if you remove the device from your skin prior to the completion of a 3 minute treatment cycle.

Step 1 If the device is removed from the skin during a treatment cycle and 3 minutes have not elapsed, the device will beep for 30 seconds.

Step 2 If you wish to continue treating the same area you were treating and 30 seconds have not elapsed, reapply the device to your skin.

Step 3 The display on the device will show the remaining treatment time if you do

not reapply the device to your skin. The Treatment Head life indicator and the

battery indicator will display the status of the device. If you do not reapply

the device to skin in 30 seconds, the device will shut off.

f.

b.

Controls

 

 

 

a. Power Button

 

a.

b. Head Latch Buttons

 

Status Indicators

 

 

 

c.

c. Information Display

 

d. Battery Life Indicator Lights

 

d.

 

e. Treatment Head Life Indicator Lights

 

 

 

e.

f. 32 LED Lamps

 

 

18

Image 18
Contents Phototherapy System for Acne CW01Please read the entire Table Of Contents Glossary Glossary Contents Include Product DescriptionOperating Environmental Specification Status IndicatorsTreatment Specification Transport and Storage SpecificationImportant Safeguards Indications for UseContraindications Page Page Page Alternative Procedures and Treatments RisksBenefits DecisionCARE& CLEANINGFramework Acne Type Description of Condition ClearWave UseDecisionCAREFramework& Cleaning Guide for Use in the Home or in a Mobile EnvironmentWhat other conditions can imitate acne Before Procedure or Treatment Information Instructions,CAREOperation& CLEANINGand Directions for Use Getting StartedInstructions, Operation and Directions for Use To Charge Without Charging StandTreatment Head Life Indicator Lights Power ButtonBattery Life Indicator Lights Interrupted TreatmentInformation Display Indicators Treatment Head Life Indicator and Battery Life IndicatorChecking the Status of the Clearwave Device Instructions, OperationCAREand&DirectionsCLEANINGfor Use Replacing the Treatment HeadInjury Turn off and unplug device before cleaning Cold Protection Mode Heat Protection ModeIf your device enters Heat Protection Mode After Procedure Treatment Information CARETroubleshooting& Cleaning Issue ProblemTravel with the Device When to CallCAREyour& CLEANINGHealthcare ProviderUser Assistance toll free number Call your Healthcare ProviderPage One Year Limited Warranty Mad River Park, Waitsfield, VTManufactured for Verilux, Waitsfield, VT