Before Procedure or Treatment Information
Before using the device it is necessary to conduct a skin sensitivity test.
Ensure that you follow the instructions to completely charge the device found on page 16.
Step 1 Read the Important Safeguards section on pages
Step 2 Wash the proposed test area on your forearm with a pH neutral cleanser. Ensure it is dry before treatment.
Step 3 Place the goggles provided with the unit on so that your eyes are covered. Adjust the strap on the goggles to ensure that they fit snugly. Look through the goggles and ensure that there are no visible cracks. Do not use the goggles or the device if the goggles are cracked, damaged or will not fit snugly on your face.
Step 4 Activate the device by pushing the power button until the device beeps. Step 5 Place the device on your forearm and complete one 3 minute cycle.
Step 6 If you experience redness, rashes, pain or discomfort during the 24 hours following this treatment do not use the device again before consulting your healthcare provider.
Step 7 If no reactions have occurred on your forearm following 24 hours, you may begin treatment.
15