. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Area Requirements
The floor space at the installation site must provide:
•
•
Enough stability to support the weight of the drive module or E2400 command module, and associated equipment (see "Weights" on this page)
Sufficient space to install, operate, and service the drive module or E2400 command module (see "Dimensions" on page 12 and "Airflow" on page 16)
Weights
The drive module’s or E2400 command module’s total weight depends on the number of components installed in the chassis. Refer to the following weight tables for information on each model:
•E3300 drive module – see Table 2 on page 7
•
•E2400 10x command module – see Table 4 on page 9
•
•E2400 14x command module – see Table 6 on page 11
6 | Drive Module Site Preparation Guide |