. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drive Module Cable Requirements
Drive Module Cable Requirements
E3300 Interface Cables
The E3300 drive module has two SCSI connectors. To connect the drive module to a SYM1000E command module, you must use
The maximum length for any SCSI,
Table 14 SCSI Drive Interface Cables
| Order Information | ||
Cable Description |
|
| |
Part | Length | ||
| |||
| Number | ||
|
| ||
|
|
| |
| 1.0 meter | ||
|
|
| |
| 1.5 meter | ||
LVD, Ultra |
|
| |
3.0 meter | |||
| |||
|
|
| |
| 8 meter | ||
|
|
|
SCSI Terminators
If you are installing the drive module as the last device on a SCSI bus, you must install a 16- bit terminator on the OUT connector. Every drive module shipped from the factory includes
Drive Module Site Preparation Guide | 27 |