. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drive Module Power Requirements
FC-1 10x Drive Module and E2400 10x Command Module
The AC power source must provide the correct voltage, current, and frequency specified on the manufacturer’s nameplate. Internal AC power units for rackmount cabinets must be able to handle the power requirements for these units (Table 12).
Table 12
Item | Unit of Measure |
| Requirement | |
|
|
| ||
Circuit Breaker | 3.0 A | |||
|
|
|
| |
|
| USA | International | |
|
|
|
| |
| Nominal Voltage | 90 to 136 VAC | 198 to 264 VAC | |
|
|
|
| |
Drive Module and | Frequency | 50/60 Hz | 50/60 Hz | |
|
|
| ||
Command Module |
|
|
| |
Idle Current | 3.39 A | 1.45 A | ||
AC Power | ||||
|
|
| ||
| Maximum Operating Current | 3.53 A | 1.50 A | |
|
|
|
| |
| Maximum Surge Current (10- | 5.19 A | 2.10 A | |
| drive spin up) | |||
|
|
| ||
|
|
|
|
Drive Module Site Preparation Guide | 23 |