Land Pride PR1672 manual Drive Chain Adjustment, End Plates

Page 17

Land Pride

Section 3: Adjustments

Table of Contents

Drive Chain Adjustment

Refer to Figure 3-3

!CAUTION

BEFORE any maintenance is performed, lower the Powered Rake to the ground, stop tractor engine and remove ignition key. DO NOT make maintenance adjustments while tractor is running.

End Plates

Refer to Figure 3-4

End plates (#1) & (#2) are utilized to collect rocks and debris in front of the roller for the purpose of distributing material over low areas. They can be removed and stored on the right hand side of the rake by removing the linch pins (#3) containing the plates and reposition the plates on top side of the right end of the rake as shown below. Secure by reinserting the linch pins (#3).

1.Check chain tension by removing 1/4” x 5/8” hex bolts (#4), lockwashers (#9) and access cover (#2) from the chain case.

2.Inspect chain for tightness and excess wear. Replace worn out chains. See “Sprocket and Drive Chain Replacement” page 19.

3.Tension a loose chain by turning the take-up bolt (#5)

clockwise. Don’t over tension. See note below.

.

NOTE: Do not over tension roller chain. Roller chain should be tightened with a slight amount of slack. A chain tensioned too tight will increase sprocket and chain wear.

4.Turn tension roller several turns and observe the chain to make sure everything is working properly.

5.Apply 1/8” bead of Land Pride No. 821-049C sealant on the surface of the main cover (#1) in location where the access cover (#2) contacts the main cover (#1).

Reinstall access cover (#2) and secure with lockwashers (#9) and 1/4”-20 x 5/8” GR5 hex bolts (#4). Torque hex bolts to correct torque.

21097

21095

End Plates (Shown in stored position)

Figure 3-4

Drive Chain Adjustment

Figure 3-3

10/20/06

PR1660, PR1672 & PR1690 Powered Rakes 314-216M

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Powered Rakes Table of Contents Be Aware Signal Words Important Safety InformationFor Your Protection Shutdown and StoragePractice Safe Maintenance Use Safety Lights and DevicesTransport Machinery Safely Keep Riders Off MachineryAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment 818-255C Safety Labels818-229C 818-230C818-130C 838-111C818-552C 818-540C 838-094CApplication Using This ManualOwner Assistance IntroductionTractor Requirements Assembly and Set-UpTractor Hook-Up Hydraulic OptionPTO Hook-Up Hydraulic Hook-up Optional Operating Check List Operating ChecklistTransporting Operating InstructionsOperating Instructions Gauge Wheels AdjustmentsRake Angle Material Control DeflectorEnd Plates Drive Chain AdjustmentSlip Clutch Maintenance MaintenanceMaintenance & Lubrication Slip Clutch with Hex Socket BoltsClutch Run-In with hex head bolts Slip Clutch with Hex Head BoltsClutch Assembly with hex head bolts Drive Chain MaintenanceChain Case Skid Shoe Replacement Sprocket and Chain Replacement Storage Hours LubricationPivot Gauge Wheel SpindleDrive Chain RequiredNon-Drive Bearing GearboxPR1660 PR1672 PR1690 PR16 Series Powered RakeSpecifications & Capacities Features Benefits Features & BenefitsTroubleshooting Appendix Torque Values Chart for Common Bolt SizesTire Inflation Chart Overall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

PR1672 specifications

The Land Pride PR1672 is a versatile and robust landscape rake designed for a variety of applications, including grading, leveling, and clearing debris from uneven terrains. With an impressive working width of 72 inches, this rake is suitable for use with compact tractors and utility vehicles, making it an ideal choice for both professional landscapers and homeowners looking to maintain their properties.

One of the key features of the PR1672 is its heavy-duty construction. Built with high-quality materials, the rake is engineered to withstand the rigors of tough landscaping tasks. The 3-point hitch attachment allows for easy connection to a wide range of tractors, ensuring compatibility and ease of use. The adjustable side rails enhance its functionality, enabling operators to control the depth of the rake and optimize its performance based on varying soil conditions and desired outcomes.

The rake’s design includes curved tines that are strategically spaced to effectively gather and redistribute soil, gravel, and other materials. This innovative tine design helps in achieving a smooth finish while minimizing the likelihood of clogging, which can be a common issue with traditional rakes. Additionally, the tines are replaceable, making maintenance straightforward and extending the tool’s overall lifespan.

Incorporating advanced manufacturing techniques, the PR1672 features a durable powder-coated finish that provides resistance against rust and corrosion. This ensures that the rake can endure various weather conditions and remains effective for years to come. The implement also benefits from Land Pride's commitment to safety, with features designed to protect both the user and the equipment being operated.

The versatility of the PR1672 extends beyond mere landscaping. It can also be employed in agriculture, helping to prepare seedbeds or maintain farm roads. Its adaptability makes it an invaluable tool for anyone looking to improve their outdoor spaces efficiently.

Overall, the Land Pride PR1672 is an essential piece of equipment that delivers reliability and performance. With its robust build, smart design features, and user-friendly operation, it stands out as an excellent solution for those looking to take on challenging outdoor tasks while achieving professional results. Whether tackling residential projects or commercial landscapes, the PR1672 is equipped to handle the job with ease.
Top Page Image Contents