Land Pride PR1672 manual Drive Chain Maintenance, Chain Case Skid Shoe Replacement

Page 20

Table of Contents

Section 4: Maintenance & Lubrication

Land Pride

Clutch Assembly (with hex head bolts)

Refer to Figure 4-5

If clutch run-in indicated that one or more of the friction disks did not slip, then the clutch must be disassembled to separate parts.

1.Remove spring retainer nuts (#9a), springs (#2) and bolts (#9b) from the assembly.

2.Each friction disk (#5) must then be separated from the metal surface adjacent to it.

3.Inspect all parts for excessive wear and condition. Clean all parts that do not require replacement.

•The original disk thickness is 1/8" and should be replaced if thickness falls below 3/32".

•If the clutch has slipped to the point of “smoking”, the friction disks may be damaged and should be replaced. Heat build-up may also affect the yoke joints.

Refer to Figure 4-6

7.Progressively tighten each spring retainer bolt until correct compressed spring length “A” is reached.

• A = 1.26”

23844

Clutch Assembly

Figure 4-5

4.Reassemble each friction disk (#5) next to the metal plate it was separated from.

5.Make certain bushing #4 is positioned as shown. Install bolts (#9b) through the end plates and intermediate plates as shown.

6.Place springs (#2) over the bolts and secure with nuts (#9a).

23997

Clutch Adjustment

Figure 4-6

Drive Chain Maintenance

Refer to Figure 4-7

The operator should check chain tightness after initial run in and periodically thereafter to make sure that the drive chain is tensioned correctly. If adjustment is needed refer to “Drive Chain Adjustment” on page 15.

Chain Case Skid Shoe Replacement

1.Replace chain case skid shoe (#1) by removing four 3/8” x 3/4” hex head bolts (#2) and lockwashers (#3).

2.Replace worn skid shoe with new shoe.

3.Secure skid shoe (#1) with 3/8” lockwashers (#3) and four 3/8” x 3/4” hex head bolts (#2).

4.Torque hex bolts to correct torque.

21096

Chain Case Skid Shoe Replacement

Figure 4-7

18 PR1660, PR1672 & PR1690 Powered Rakes 314-216M

10/20/06

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Powered Rakes Table of Contents Important Safety Information Be Aware Signal WordsFor Your Protection Shutdown and StorageUse Safety Lights and Devices Practice Safe MaintenanceTransport Machinery Safely Keep Riders Off MachineryAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Safety Labels 818-255C818-230C 818-229C818-130C 838-111C818-552C 838-094C 818-540CUsing This Manual ApplicationOwner Assistance IntroductionAssembly and Set-Up Tractor RequirementsTractor Hook-Up Hydraulic OptionPTO Hook-Up Hydraulic Hook-up Optional Operating Checklist Operating Check ListTransporting Operating InstructionsOperating Instructions Adjustments Gauge WheelsRake Angle Material Control DeflectorDrive Chain Adjustment End PlatesMaintenance Slip Clutch MaintenanceMaintenance & Lubrication Slip Clutch with Hex Socket BoltsSlip Clutch with Hex Head Bolts Clutch Run-In with hex head boltsClutch Assembly with hex head bolts Drive Chain MaintenanceChain Case Skid Shoe Replacement Sprocket and Chain Replacement Storage Lubrication HoursPivot Gauge Wheel SpindleRequired Drive ChainNon-Drive Bearing GearboxPR1660 PR1672 PR1690 PR16 Series Powered RakeSpecifications & Capacities Features & Benefits Features BenefitsTroubleshooting Appendix Torque Values Chart for Common Bolt SizesTire Inflation Chart Warranty Overall Unit and Driveline One year Parts and LaborCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

PR1672 specifications

The Land Pride PR1672 is a versatile and robust landscape rake designed for a variety of applications, including grading, leveling, and clearing debris from uneven terrains. With an impressive working width of 72 inches, this rake is suitable for use with compact tractors and utility vehicles, making it an ideal choice for both professional landscapers and homeowners looking to maintain their properties.

One of the key features of the PR1672 is its heavy-duty construction. Built with high-quality materials, the rake is engineered to withstand the rigors of tough landscaping tasks. The 3-point hitch attachment allows for easy connection to a wide range of tractors, ensuring compatibility and ease of use. The adjustable side rails enhance its functionality, enabling operators to control the depth of the rake and optimize its performance based on varying soil conditions and desired outcomes.

The rake’s design includes curved tines that are strategically spaced to effectively gather and redistribute soil, gravel, and other materials. This innovative tine design helps in achieving a smooth finish while minimizing the likelihood of clogging, which can be a common issue with traditional rakes. Additionally, the tines are replaceable, making maintenance straightforward and extending the tool’s overall lifespan.

Incorporating advanced manufacturing techniques, the PR1672 features a durable powder-coated finish that provides resistance against rust and corrosion. This ensures that the rake can endure various weather conditions and remains effective for years to come. The implement also benefits from Land Pride's commitment to safety, with features designed to protect both the user and the equipment being operated.

The versatility of the PR1672 extends beyond mere landscaping. It can also be employed in agriculture, helping to prepare seedbeds or maintain farm roads. Its adaptability makes it an invaluable tool for anyone looking to improve their outdoor spaces efficiently.

Overall, the Land Pride PR1672 is an essential piece of equipment that delivers reliability and performance. With its robust build, smart design features, and user-friendly operation, it stands out as an excellent solution for those looking to take on challenging outdoor tasks while achieving professional results. Whether tackling residential projects or commercial landscapes, the PR1672 is equipped to handle the job with ease.
Top Page Image Contents