Land Pride PR1672 manual Slip Clutch Maintenance, Slip Clutch with Hex Socket Bolts

Page 18

Table of Contents

Section 4: Maintenance & Lubrication

Land Pride

Maintenance

Proper servicing and adjustment is the key to the long life of any implement. With careful and systematic inspection, you can avoid costly maintenance, time and repair.

After using your Powered Rake for several hours, check all bolts to be sure they are tight.

Replace any worn, damaged or illegible safety labels by obtaining new labels from your Land Pride Dealer.

!CAUTION

BEFORE any maintenance is performed, lower the Powered Rake to the ground, stop tractor engine and remove ignition key. DO NOT attempt to make maintenance adjustments while tractor is running.

Hex Socket Bolts

21270

Slip Clutch with Hex Socket Bolts

Figure 4-1

Slip Clutch Maintenance

Slip clutches should be “run-in” prior to initial operation and after long periods of inactivity. To prevent driveline and gearbox damage, repeat “Run-In” instructions at the beginning of each season and when moisture and/or condensation seizes the inner friction disks.

Your Powered Rake will have one of two types of slip clutches. One is adjustable with hex socket bolts and the other is adjustable with hex head bolts. Refer to Figure 4-1 and Figure 4-2 to determine which slip clutch your Powered Rake has. Follow run-in and assembly instructions for your particular slip below.

Slip Clutch with Hex Socket Bolts

If your clutch has enclosed friction disks and is tensioned with hex socket bolts as shown in Figure 4-1, follow clutch run-in and assembly instructions below.

If your clutch has exposed friction disks and is tensioned with hex head bolts as shown in Figure 4-2, skip to “Slip Clutch with Hex Head Bolts” on page 17.

Clutch Run-in (with hex socket bolts)

Refer to Figure 4-1:

1.Loosen counterclockwise all 8 hex socket bolts uniformly 6 full turns.

2.Cycle clutch on and off 5 or 6 times (15 seconds on and 15 seconds off) with the engine operating at half throttle.

3.Tighten clockwise all 8 hex socket bolts fully back. Clutch is ready for use.

Clutch Assembly (with hex socket bolts)

Hex Head Bolts

24501

Slip Clutch with Hex Head Bolts

Figure 4-2

Refer to Figure 4-3 on page 17:

If clutch run-in indicated that one or more of the friction disks did not slip, then the clutch must be disassembled into separate parts.

1.Rotate the 8 hex head socket bolts (#4) all the way out to free stop flange (#5).

2.Rotate stop flange (#5) and remove from housing (#1)

3.Remove the following inner components:

a.Spring kit (#6)

b.Pressure flange (#7)

c.1st Friction disk (#8)

d.Hub with flange and pull collar (#2 & #3)

e.2nd Friction disk (#8)

f.Bearing (#9)

4.Inspect all components and replace to their original position. Make certain stop flange (#5) is replaced with its flange down as shown.

5.Fully tighten all 8 hex socket bolts (#4).

16 PR1660, PR1672 & PR1690 Powered Rakes 314-216M

10/20/06

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Powered Rakes Table of Contents For Your Protection Important Safety InformationBe Aware Signal Words Shutdown and StorageTransport Machinery Safely Use Safety Lights and DevicesPractice Safe Maintenance Keep Riders Off MachineryPrepare for Emergencies Wear Protective EquipmentAvoid High Pressure Fluids Hazard Safety Labels 818-255C818-230C 818-229C838-111C 818-552C818-130C 838-094C 818-540COwner Assistance Using This ManualApplication IntroductionTractor Hook-Up Assembly and Set-UpTractor Requirements Hydraulic OptionPTO Hook-Up Hydraulic Hook-up Optional Transporting Operating ChecklistOperating Check List Operating InstructionsOperating Instructions Rake Angle AdjustmentsGauge Wheels Material Control DeflectorDrive Chain Adjustment End PlatesMaintenance & Lubrication MaintenanceSlip Clutch Maintenance Slip Clutch with Hex Socket BoltsSlip Clutch with Hex Head Bolts Clutch Run-In with hex head boltsDrive Chain Maintenance Chain Case Skid Shoe ReplacementClutch Assembly with hex head bolts Sprocket and Chain Replacement Storage Pivot LubricationHours Gauge Wheel SpindleNon-Drive Bearing RequiredDrive Chain GearboxPR16 Series Powered Rake Specifications & CapacitiesPR1660 PR1672 PR1690 Features & Benefits Features BenefitsTroubleshooting Torque Values Chart for Common Bolt Sizes Tire Inflation ChartAppendix Warranty Overall Unit and Driveline One year Parts and LaborCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

PR1672 specifications

The Land Pride PR1672 is a versatile and robust landscape rake designed for a variety of applications, including grading, leveling, and clearing debris from uneven terrains. With an impressive working width of 72 inches, this rake is suitable for use with compact tractors and utility vehicles, making it an ideal choice for both professional landscapers and homeowners looking to maintain their properties.

One of the key features of the PR1672 is its heavy-duty construction. Built with high-quality materials, the rake is engineered to withstand the rigors of tough landscaping tasks. The 3-point hitch attachment allows for easy connection to a wide range of tractors, ensuring compatibility and ease of use. The adjustable side rails enhance its functionality, enabling operators to control the depth of the rake and optimize its performance based on varying soil conditions and desired outcomes.

The rake’s design includes curved tines that are strategically spaced to effectively gather and redistribute soil, gravel, and other materials. This innovative tine design helps in achieving a smooth finish while minimizing the likelihood of clogging, which can be a common issue with traditional rakes. Additionally, the tines are replaceable, making maintenance straightforward and extending the tool’s overall lifespan.

Incorporating advanced manufacturing techniques, the PR1672 features a durable powder-coated finish that provides resistance against rust and corrosion. This ensures that the rake can endure various weather conditions and remains effective for years to come. The implement also benefits from Land Pride's commitment to safety, with features designed to protect both the user and the equipment being operated.

The versatility of the PR1672 extends beyond mere landscaping. It can also be employed in agriculture, helping to prepare seedbeds or maintain farm roads. Its adaptability makes it an invaluable tool for anyone looking to improve their outdoor spaces efficiently.

Overall, the Land Pride PR1672 is an essential piece of equipment that delivers reliability and performance. With its robust build, smart design features, and user-friendly operation, it stands out as an excellent solution for those looking to take on challenging outdoor tasks while achieving professional results. Whether tackling residential projects or commercial landscapes, the PR1672 is equipped to handle the job with ease.
Top Page Image Contents