6SERVICE & PRODUCT MAINTENANCE
6.1TROUBLESHOOTING
Problem |
| Cause / Solution | |
| Check to see that the power cord is fully plugged into the back of the | ||
| Lifecycle exercise bike and into the wall. Make sure the power cord is fully | ||
| seated into the back of the Lifecycle exercise bike. | ||
|
| ||
No power. | You may be in “Energy Saver Mode”. Press the “Energy Saver” button to | ||
see if the console turns on. | |||
| |||
|
| ||
| Verify that all customer assembly connections are working properly. | ||
| Unplug and | ||
| were pinched during assembly. | ||
|
| ||
Clicking noise while pedaling. | Use the wrench that was included with the Lifecycle exercise bike to | ||
ensure the pedals are assembled as tight as possible. | |||
| |||
|
| ||
Hear noise as speed increases. | It is normal for any mechanical device to become louder as speed | ||
increases. | |||
| |||
|
| ||
Can’t feel a resistance change at the | The resistance curve of the Lifecycle exercise bike is designed so that | ||
beginning levels. | you can feel a greater difference in resistance at higher levels. | ||
|
| ||
| Potential reasons for the wireless heart rate not to work properly include: | ||
| 1. The wireless heart rate is turned OFF in the Settings Menu. Enter | ||
|
| the Settings Menu and verify that WIRELESS HR is turned ON. | |
| 2. There is poor contact between the telemetry heart rate strap and | ||
Wireless heart rate is not working. |
| the skin. | |
3. | There is electrical interference from electrical appliances with the | ||
| |||
|
| telemetry heart rate strap from fluorescent lights, kitchen appliances, | |
|
| etc. Move the Lifecycle exercise bike to a different location or move | |
|
| electrical appliances away from the Lifecycle exercise bike. | |
| 4. | The battery in the Heart Rate Telemetry Strap needs to be replaced. | |
|
| The battery is a CR2032 (3V). | |
|
|
| |
19
