Land Pride ZRP52, ZRP44 Controls, Operating, Ignition Switch, Throttle Control, Choke Control

Table of Contents

Section 2 Operating

Land Pride

	8			9	10	17			12
								14	11
	12									3
										12
										16
										5
	12
	6
	8
21044		7	1	4	2				11
						18			12
								15
1.	Ignition Switch			13			17			14. Left Deck Cover
2.	Throttle Lever		6.	Hour Meter			10. Battery			15. Right Deck Cover
3.	Control Levers		7.	Oil Pressure Light			11. Deck Adjusting Rod			16. Deck Height Control
4.	Blade Engagement Switch		8.	Fuel Tanks			12. Anti-Scalp Wheels			17. Park Brake Switch
5.	Deck Lift Pedal		9.	Hydraulic reservoir			13. Discharge Chute			18. Choke Lever

Razor Pro Controls

Figure 2-1

!WARNING!

Do not operate mower while smoking!

Controls

Refer to Figure 2-2

IMPORTANT: When access is required under the seat platform, make certain to place the control arms in the park brake position (out) and pivot the arm rests upward before placing the seat platform in the full forward position to prevent arm rest damage.

For general location of controls described in this section, refer to Figure 2-1.

Ignition Switch

A three position switch: off, run, and start. With key inserted, rotate it clockwise to START position; release key when engine starts, and switch will automatically return to the RUN position.

Throttle Control

A cable is linked to engine throttle for controlling engine speed. Move lever forward to increase engine rpm, move lever rearward to decrease engine rpm.

Choke Control

A cable is linked to manually operate the engine choke. When the lever is in the down position, the choke is in the off (run) position. When the lever is pulled up, the choke is in the on (start) position. DO NOT operate the machine with the choke in the on (start) position.

Ignition Switch	Oil Pressure
	Light
	Throttle
Blade Engagement
Switch
	Choke
	20686

Control Panel

Figure 2-2

8 ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M 7/14/08