Land Pride AFM4016 manual Constant Velocity Driveline Angle, Pre-Operation Instructions

Page 19

Land Pride

Table of Contents

Section 2: Operating Instructions

11770

Model 4016 Deck Float Pin

Figure 2-3

NOTE: Be sure to remove the deck floating pins before unfolding mower decks.

•Grease driveline shaft and all other grease fittings.

•Check oil level in gearboxes. Refer to the Lubrication portion of the “Maintenance and Lubrication” section starting on page 23.

•Check all plugs and caps in gearboxes to make certain that they have been replaced and tightened properly.

•Check mower blades for sharpness and damage. See “Blade Inspection” on page 23.

•Be sure blades are installed properly on each deck with the cutting edge leading in rotation. See “Blade Removal And Installation” on page 24.

•Be sure all mower blades bolts are tight. Know which center blade bolts are left hand threaded and which are right hand threaded when checking for tightness. See “Blade Removal And Installation” on page 24.

•Be sure all bolts and nuts are tight.

•Be certain all guards and shields are in place and secure.

4.Refer to “Operating Instructions”, steps 5 and 6 on page 18 for instructions on lowering the decks.

Constant Velocity Driveline Angle

Refer to Figure 2-4:

The main driveline from the tractor to the mower divider-box is equipped with a constant velocity (CV) joint. This will allow the joint to run with no vibration at angles up to 80 deg.

•Clear the area to be mowed of objects and debris that might be picked up and thrown by the mower blades

•Operate with 540 rpm PTO tractor.

•Refer to your tractor’s operator manual for engaging and disengaging the PTO.

•In case of emergency learn to stop tractor and mower quickly.

•Complete Operating Check List below.

19626

Constant Velocity Driveline Angle

Figure 2-4

IMPORTANT: The CV joint should not be subjected to angles greater than 80 deg. Failure to comply will result in driveline damage.

The constant velocity joint must be greased every 8 hours of operation. Refer to Page 31 “Driveline

Constant Velocity Shaft”.

Pre-Operation Instructions

Proper servicing and adjustments are key to the long life of any machine. With careful and systematic inspection of the mower, you can avoid costly maintenance, time and repair. Before beginning to operate your grooming mower the following inspection should be performed.

Operating Check List

✔

Check

Reference

 

 

 

 

Safety Rules

Page 1

 

 

 

 

Gearbox Gear Lube

Page 23

 

 

 

 

Tractor Hook-up

Page 14

 

 

 

 

Tire Inflation Chart

Page 46

 

 

 

 

Lubricate the mower as needed.

Page 23

 

 

 

 

Check the mower initially and

 

 

periodically for loose bolts & pins.

 

 

 

 

 

Make sure the hitch safety chain is

Page 14

 

securely attached to the mower hitch

 

 

and the tractor.

 

 

 

 

 

Inspect the blades. Make note of the

Page 23

 

wear to the blades and the sharpness

 

 

of the blades.

 

 

 

 

 

Make a thorough examination of the

 

 

driveline. Also check the connection to

 

 

the gearboxes and tractor PTO.

 

 

 

 

 

Make sure all guards and shields are in

 

 

place.

 

 

 

 

7/28/06

AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M 17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents All Flex Grooming Mowers Table of Contents For Your Protection Be Aware Signal WordsShutdown and Storage Transport Machinery Safely Use a Safety ChainPractice Safe Mainte- nance Keep Riders Off Machinery Tire SafetyWear Protective Equipment Avoid High Pressure Fluids Hazard818-003C 818-019C818-230C 818-130C 818-187C 818-229C818-337C 818-339C 818-351C 818-337C818-555C 818-351C 818-353C 818-556C818-558C 818-561C 818-456C 818-513C 818-540C 818-552CApplication Using This ManualOwner Assistance Land Pride Service Department East North Street Hydraulic Plumbing Tractor RequirementsTractor Hook-up PTO To Drawbar Set-UpBleeding The Fold Hydraulics Joint Timing IntroductionTransporting Pre-Operation Instructions Constant Velocity Driveline AngleOperating Check List General Operating Instructions Operating InstructionsTable of Contents Cutting Height Chart Center Deck Height AdjustmentsAdding or Replacing Spacers Belt TensionBall Swivel Hitch Accessory Part NumbersCutting Blades Servicing Mower Blades MaintenanceBlade Inspection Refer to -2 & Figure Blade Removal And InstallationBlade Options Blade SharpeningRefer to -8& Figure Belt InstallationClutches With 4-Tightening Nuts Driveline ProtectionClutch Run-In Clutches With 8-Alan Head Socket BoltsClutch Assembly Assembly DisassemblyStep Tires With Air Pressure StorageDriveline Shafts Lubrication PointsHours Driveline Constant Velocity ShaftWheel Support Bushings Inner Tube of DrivelineWheel Bushings Gauge Wheels Wheel Bushings Transport Hubs SeasonallyBearing in Blade Spindle Hubs Way Gear Box RequiredMower Deck Gear Box Model AFM4011 All-Flex Grooming Mower Description Specification / Capacity12701 AFM4014 Series 14044 AFM4016 Series Description Specification / Capacity13665 AFM4014 All-Flex Grooming Mower Features BenefitsNarrow 6’8 transport width AFM4016 All-Flex Grooming MowerTroubleshooting Problem Cause Solution Discharge openings Model Models 4014 TireSize Inflation Torque Values Chart for Common Bolt SizesTire Inflation Chart In-tpi Ft-lbOverall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 114 pages 59.01 Kb

AFM4016 specifications

The Land Pride AFM4016 is a versatile and robust asset designed for agricultural professionals seeking to optimize their land management operations. This 16-foot-wide aircraft mower is equipped to handle a variety of mowing tasks, from pasture maintenance to roadside trimming. Its sturdy construction ensures it can withstand the rigors of demanding environments while delivering impressive performance.

One of the primary features of the AFM4016 is its unique folding design, which allows for easy transport between mowing sites. When the mower is in transport mode, it can be safely narrowed to comply with road regulations without sacrificing cutting width or efficiency. This flexibility makes it a perfect companion for farmers who need to move their equipment frequently.

Technologically, the AFM4016 is engineered with advanced features such as its reliable gear-driven design that provides high torque for efficient cutting. This setup ensures that the mower operates smoothly in various conditions, reducing wear and tear while enhancing longevity. The reinforced steel frame factors heavily into the mower’s durability, allowing it to endure tough terrains such as rocky fields or heavy brush.

The AFM4016 also boasts a powerful cutting system that utilizes dual rotary blades, which work in tandem to create a clean and even cut. This feature not only improves aesthetic appeal but also promotes healthier regrowth of grass and forage, crucial for livestock farmers. The mower height can be easily adjusted, accommodating different types of vegetation and allowing for customization based on specific mowing needs.

In terms of operational efficiency, the Land Pride AFM4016 is designed for compatibility with a wide range of tractors, making it a versatile choice for various agricultural setups. The quick-attach hitch system enables fast and easy mounting and dismounting, enhancing productivity through reduced downtime.

Safety is a paramount consideration, and the AFM4016 comes with built-in safety features including shields that protect the operator from debris while mowing. The mower’s stability on slopes is also an important characteristic, allowing for safe operation on uneven terrains.

Overall, the Land Pride AFM4016 is an exceptional tool for land management. Its combination of durability, versatility, and advanced technology ensures that it meets the demanding needs of agricultural professionals, making it an invaluable addition to any farming operation. With this high-performance mower, users can maintain their land effectively and efficiently while achieving optimal results.
Top Page Image Contents