Land Pride AFM4016 manual Be Aware Signal Words, For Your Protection, Shutdown and Storage

Page 3

Land Pride

Important Safety Information

Table of Contents

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

7/28/06

AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M 1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents All Flex Grooming Mowers Table of Contents Be Aware Signal Words For Your ProtectionShutdown and Storage Use a Safety Chain Transport Machinery SafelyPractice Safe Mainte- nance Keep Riders Off Machinery Tire SafetyWear Protective Equipment Avoid High Pressure Fluids Hazard818-003C 818-019C818-230C 818-130C 818-187C 818-229C818-337C 818-339C 818-351C 818-337C818-555C 818-351C 818-353C 818-556C818-558C 818-561C 818-456C 818-513C 818-540C 818-552CUsing This Manual ApplicationOwner Assistance Land Pride Service Department East North Street Hydraulic Plumbing Tractor RequirementsTractor Hook-up PTO To Drawbar Set-UpBleeding The Fold Hydraulics Introduction Joint TimingTransporting Constant Velocity Driveline Angle Pre-Operation InstructionsOperating Check List General Operating Instructions Operating InstructionsTable of Contents Cutting Height Chart Center Deck Height AdjustmentsAdding or Replacing Spacers Belt TensionAccessory Part Numbers Ball Swivel HitchCutting Blades Maintenance Servicing Mower BladesBlade Inspection Refer to -2 & Figure Blade Removal And InstallationBlade Options Blade SharpeningRefer to -8& Figure Belt InstallationClutches With 4-Tightening Nuts Driveline ProtectionClutch Run-In Clutches With 8-Alan Head Socket BoltsClutch Assembly Disassembly AssemblyStep Tires With Air Pressure StorageDriveline Shafts Lubrication PointsHours Driveline Constant Velocity ShaftInner Tube of Driveline Wheel Support BushingsWheel Bushings Gauge Wheels Wheel Bushings Transport Hubs SeasonallyBearing in Blade Spindle Hubs Required Way Gear BoxMower Deck Gear Box Model AFM4011 All-Flex Grooming Mower Description Specification / Capacity12701 AFM4014 Series 14044 AFM4016 Series Description Specification / Capacity13665 AFM4014 All-Flex Grooming Mower Features BenefitsNarrow 6’8 transport width AFM4016 All-Flex Grooming MowerTroubleshooting Problem Cause Solution Discharge openings Model Models 4014 TireSize Inflation Torque Values Chart for Common Bolt SizesTire Inflation Chart In-tpi Ft-lbOverall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 114 pages 59.01 Kb

AFM4016 specifications

The Land Pride AFM4016 is a versatile and robust asset designed for agricultural professionals seeking to optimize their land management operations. This 16-foot-wide aircraft mower is equipped to handle a variety of mowing tasks, from pasture maintenance to roadside trimming. Its sturdy construction ensures it can withstand the rigors of demanding environments while delivering impressive performance.

One of the primary features of the AFM4016 is its unique folding design, which allows for easy transport between mowing sites. When the mower is in transport mode, it can be safely narrowed to comply with road regulations without sacrificing cutting width or efficiency. This flexibility makes it a perfect companion for farmers who need to move their equipment frequently.

Technologically, the AFM4016 is engineered with advanced features such as its reliable gear-driven design that provides high torque for efficient cutting. This setup ensures that the mower operates smoothly in various conditions, reducing wear and tear while enhancing longevity. The reinforced steel frame factors heavily into the mower’s durability, allowing it to endure tough terrains such as rocky fields or heavy brush.

The AFM4016 also boasts a powerful cutting system that utilizes dual rotary blades, which work in tandem to create a clean and even cut. This feature not only improves aesthetic appeal but also promotes healthier regrowth of grass and forage, crucial for livestock farmers. The mower height can be easily adjusted, accommodating different types of vegetation and allowing for customization based on specific mowing needs.

In terms of operational efficiency, the Land Pride AFM4016 is designed for compatibility with a wide range of tractors, making it a versatile choice for various agricultural setups. The quick-attach hitch system enables fast and easy mounting and dismounting, enhancing productivity through reduced downtime.

Safety is a paramount consideration, and the AFM4016 comes with built-in safety features including shields that protect the operator from debris while mowing. The mower’s stability on slopes is also an important characteristic, allowing for safe operation on uneven terrains.

Overall, the Land Pride AFM4016 is an exceptional tool for land management. Its combination of durability, versatility, and advanced technology ensures that it meets the demanding needs of agricultural professionals, making it an invaluable addition to any farming operation. With this high-performance mower, users can maintain their land effectively and efficiently while achieving optimal results.
Top Page Image Contents