Leveling Procedure, Cutter Height Adjustment

Table of Contents

Section 2: Adjustments

Leveling Procedure

There are three primary adjustments that should be made prior to actual field operations:

a.Deck level from left to right

b.Tractor lower link height

c.Tailwheel height

Proper adjustment of each of these items will provide for higher efficiency, improved cutting performance and longer blade life. The following tools will be needed:

a.Pliable tape measure

b.Spirit or carpenter’s level

c.Open end or hex end wrench or socket set

d.Protective gloves

Having completed the “Tractor Hook-up”, locate the tractor on a flat, level surface.

1.Use the tractor’s hydraulic 3-point control to lower the cutter until the front of the skid shoes barely touch the ground.

2.Place a spirit level or other suitable leveling device left to right on the front of the cutter deck. Adjust either one or both of the tractor’s lower link height adjustments to level the deck from left to right. Some tractors have only a single adjusting crank.

3.Similarly, place a level front to rear on either of the main deck channels. Lower or raise tailwheel to level the cutter deck from front to rear.

!DANGER!

Engage parking brake, disengage PTO, shut off tractor and remove key before proceeding. Ensure that all moving parts have come to a complete stop before dismounting from the tractor.

!CAUTION!

Wear a pair of gloves when performing this operation. Go to the back of the cutter and carefully rotate one dishpan and attached two blades to the position shown in Figure 2-1. Avoid direct contact with the cutting edge of the blade.

Minimum Cutting Height

Refer to Figure 2-1

Measure the distance from the end (cutting tip) of the blade to the ground surface. This distance is the minimum cutting height.

Cutter Height Adjustment

The unit is equipped with a ratchet jack or hydraulic cylinder for cutting height adjustment. The hydraulic selection includes stroke control spacers to set cutting height. Stroke control spacers consist of cast steel halves and a spring clip. To adjust height, simply extend the hydraulic cylinder with the tractor hydraulics and remove or replace the stroke control spacers for the desired height. Each spacer is 1”. Retract the hydraulic cylinder. Store stroke control spacers on hydraulic hose near hydraulic cylinder.

Cutting Height

20712

Cutting Height

Figure 2-1

14 RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters 312-708M

6/26/06

RCSM3510, RCSM3596, RCS3596, RCS3510 specifications

Land Pride is a leading manufacturer of agricultural and landscaping equipment, known for its dedication to quality and innovation. Among its impressive lineup are the RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters, specifically engineered to meet the diverse demands of land clearing and maintenance.

Starting with the RCS3510, this model features a cutting width of 10 feet, making it ideal for larger areas that require efficient vegetation management. Its robust design incorporates a 1/4-inch steel deck for enhanced durability and ruggedness under various terrain conditions. This model offers adjustable skids that enable operators to manage cutting height effectively, ensuring an optimal finish on different surfaces.

Next, the RCS3596 delivers a slightly larger cutting width of 96 inches, making it perfect for commercial applications. It is built with a heavy-duty frame and offers a reinforced steel deck that withstands harsh conditions. The RCS3596 is equipped with a cutting mechanism that utilizes dual-blade technology, ensuring a cleaner cut and more efficient operation. The quick-attach hitch system also enhances productivity by enabling fast and easy attachment to various tractors.

For those who require a more compact solution, the RCSM3596 and RCSM3510 models offer a slimmed-down approach without compromising performance. The RCSM3596 has a cutting width of 96 inches, and its high-strength gearboxes ensure reliable power transfer and longevity. This model has a unique feature where the winged design allows for easy maneuverability in tight spaces while still providing excellent cutting capabilities.

The RCSM3510 features a 10-foot cutting width with a lightweight structure that maximizes tractor efficiency. Both RCSM models come with a low-profile design, allowing for optimal visibility and precision during operation. In terms of safety, all four models incorporate shielded gearboxes and safety features that protect the operator and enhance overall job site safety.

In conclusion, the Land Pride RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters represent a blend of performance, durability, and advanced technologies that meet the needs of modern land management. With their heavy-duty construction, innovative designs, and user-friendly features, these models stand out in the competitive market, delivering exceptional value to operators seeking reliable and efficient cutting solutions. Whether managing large fields or navigating tight spaces, Land Pride rotary cutters are engineered to excel in any task.