Land Pride RCSM3510, RCS3510, RCS3596, RCSM3596 manual Features and Benefits, Features Benefits

Page 27

Land Pride

Table of Contents

Section 6: Features and Benefits

 

RCS(M)3596 & RCS(M)3510 Series

 

 

Features

Benefits

 

 

Surpassed rugged

All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing

industry standards

procedures specified by ANSI.

 

 

Tractor HP range

30-120 HP.

 

 

540 or 1000 RPM

Fits wider variety of tractors.

 

 

5 Year limited

Shows our confidence in the gearbox integrity.

gearbox warranty

 

 

 

3 Gearboxes

Allows equal torque to be spread to left and right gearbox.

 

 

Gearbox HP rating

120 Horsepower on splitter gearbox and 100 HP on wing gearboxes.

 

 

Splined rubber flex-couplers

Protects the driveline and gearboxes from hard objects in the blade path.

between center and

 

outboard gearboxes

 

 

 

Slip-clutch protection

Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.

on main driveline

 

 

 

Semi-mount categories

Semi-mount allows for hydraulic offset. (Cat. 1 & 2 on 96” & Cat 2 & 3 on 10’-0”)

 

 

Offset capability

Offset 13” right and left, hydraulically for time saving maneuverability.

 

 

Cutting Width

8’-2” on RCS3596 and 10’-0” on RCS3510.

 

 

10 Gauge deck, fully welded

Fully welded deck adds rigidity.

 

 

1/4” Thick sidewalls

Protects sidewalls from thrown objects.

 

 

Obstacle free underside

Underside of deck is free of reinforcement members which tend to allow material to lodge.

 

 

Round back design

Allows for cleaner and efficient discharge of material, helps eliminate damage to rear

 

corners by not sticking out.

 

 

Chain or rubber guards

Reduces flying debris.

 

 

Full length skids with

Adds reinforcement to side panels. Replaceable shoes allow for change before wearing

replaceable shoes

through to weld-on piece.

 

 

Splined blade hub

Splined blade hub offers tight non-slipping attachment to output shaft.

 

 

3/16” Round stump jumper

Standard stump jumper aids in sliding over obstructions, which helps protect gearbox

 

output shaft.

 

 

1/2” x 4” Blade bar

Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.

 

 

1/2” x 4” Heat-treated blades

Heat-treated blades last longer than non heat-treated blades.

 

 

2” Diameter cutting capacity

Aids in cutting brush.

 

 

High Blade tip speed

96” deck width - (540 rpm = 14,223 fpm; 1000 rpm = 14,442 fpm)

 

10’-0” deck width (540 rpm = 17,291 fpm; 1000 rpm = 17,569 fpm)

 

Allows clean cutting of material.

 

 

Laminated tires

Laminated tires can handle almost any condition and don’t go flat.

 

 

Quick hitch adaptable

Both 96” and 10’-0” models are Quick Hitch Adaptable.

 

 

6/26/06

RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters 312-708M

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Rotary Cutters Table of Contents Shutdown and Storage Important Safety InformationBe Aware Signal Words For Your ProtectionUse a Safety Chain Transport Machinery SafelyPractice Safe Mainte- nance Wear Protective Equipment Keep Riders Off MachineryAvoid High Pressure Fluids Hazard 818-230C 818-130C Shown 818-240C 818-229C818-552C 818-556C 818-543C818-564C 818-142C838-094C 818-552C 818-540CIntroduction Using This ManualApplication Owner AssistanceDealer Preparations Pre-Assembly ChecklistAssembly and Set-Up Tractor RequirementsHitch Assembly Tailwheel AssemblyDriveline Installation Rear Chain Guards Safety Guards OptionalFront Rubber Guards Front Chain GuardsVent Plug Installation PTO Hook-upTractor Hook-Up Hydraulic Hook-Up Un-Hooking from the TractorMinimum Cutting Height Leveling ProcedureCutter Height Adjustment AdjustmentsOffset Function Operating ChecklistOperating Check List TransportingRight Cutting InstructionsCrossing Steep Ditches & Banks Ditch / BankGeneral Operating Instructions Land Pride Cutter Blade Parts MaintenanceService Cutting Blades Maintenance and LubricationClutch Assembly and Disassembly Driveline ClutchClutch Run-In Storage Tractor MaintenanceSkid Shoe Maintenance Flex CouplersTailwheel Hub LubricationHours Tailwheel Spindle TubeOffset Arms Driveline U-JointsDriveline Ratchet Jack Flex CouplerRCSM3596 & RCSM3510 Series Specifications & CapacitiesFeatures Benefits Features and BenefitsProblem Cause Solution Oil seal leaking TroubleshootingProblem Cause Solution Excessive vibration Appendix Torque Values Chart for Common Bolt SizesWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 52 pages 58.67 Kb

RCSM3510, RCSM3596, RCS3596, RCS3510 specifications

Land Pride is a leading manufacturer of agricultural and landscaping equipment, known for its dedication to quality and innovation. Among its impressive lineup are the RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters, specifically engineered to meet the diverse demands of land clearing and maintenance.

Starting with the RCS3510, this model features a cutting width of 10 feet, making it ideal for larger areas that require efficient vegetation management. Its robust design incorporates a 1/4-inch steel deck for enhanced durability and ruggedness under various terrain conditions. This model offers adjustable skids that enable operators to manage cutting height effectively, ensuring an optimal finish on different surfaces.

Next, the RCS3596 delivers a slightly larger cutting width of 96 inches, making it perfect for commercial applications. It is built with a heavy-duty frame and offers a reinforced steel deck that withstands harsh conditions. The RCS3596 is equipped with a cutting mechanism that utilizes dual-blade technology, ensuring a cleaner cut and more efficient operation. The quick-attach hitch system also enhances productivity by enabling fast and easy attachment to various tractors.

For those who require a more compact solution, the RCSM3596 and RCSM3510 models offer a slimmed-down approach without compromising performance. The RCSM3596 has a cutting width of 96 inches, and its high-strength gearboxes ensure reliable power transfer and longevity. This model has a unique feature where the winged design allows for easy maneuverability in tight spaces while still providing excellent cutting capabilities.

The RCSM3510 features a 10-foot cutting width with a lightweight structure that maximizes tractor efficiency. Both RCSM models come with a low-profile design, allowing for optimal visibility and precision during operation. In terms of safety, all four models incorporate shielded gearboxes and safety features that protect the operator and enhance overall job site safety.

In conclusion, the Land Pride RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters represent a blend of performance, durability, and advanced technologies that meet the needs of modern land management. With their heavy-duty construction, innovative designs, and user-friendly features, these models stand out in the competitive market, delivering exceptional value to operators seeking reliable and efficient cutting solutions. Whether managing large fields or navigating tight spaces, Land Pride rotary cutters are engineered to excel in any task.
Top Page Image Contents