Land Pride RCR2584 manual Deck Attitude Adjustment, Lift-Type, Trail-Type

Page 21

Land Pride

Section 3 Adjustments

Table of Contents

Deck Attitude Adjustment

Refer to Figure 3-7:

This adjustment is very important. With the deck posi- tioned at this attitude, the blades will be cutting material only at the front of the cutter. If the deck is level, or the rear of the cutter is lower than the front, the blades are subject to continuous material flow which results in additional blade wear and horsepower loss as well as more frequent blade sharpening.

Lift-Type

1.Place tractor and mower on level surface.

2.Raise the mower to approximate desired cutting height with tractor hydraulic lever.

3.Loosen and remove bolts on adjusting brackets and position tailwheel.

4.Lower the cutter slowly until mower is 1” lower at front than at rear. Set stop on tractor lift quadrant so the cut- ter can be returned to same height.

5.Adjust top link. Refer to Figure 3-2.

Trail-Type

1.Place tractor and mower on level surface.

2.Retract ratchet jack or hydraulic cylinder to raise rear wheels off of ground.

3.Remove clevis pins from level rod assembly and axle.

4.Unscrew (only) short level rod weldment from level rod assembly approximately 1/4”, and reassemble to axle weldment.

 

Best Deck Attitude for Cutting

14392

 

Figure 3-7

7/14/08

RCR2584 Rotary Cutter 312-459M

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Rotary Cutter Operator’st ’s ManuallTable of Contents Keep Riders Off Machinery Be Aware of Signal WordsFor Your Protection Shutdown and StoragePractice Safe Maintenance Use Safety Lights and DevicesPrepare for Emergencies Wear Protective EquipmentTable of Contents 818-130C 818-187C Safety Labels818-230C 818-540C818-552C 838-094C 818-830COwner Assistance Using This ManualPoint Quick Hitch Assembly Point Hitch AssemblyDriveline Installation Tractor RequirementsDual Tailwheel Assembly Single Tailwheel AssemblyTrail-Type Cutter Hitch AssemblyAxle Assembly Safety GuardsRear Chain Guard Front Chain GuardPoint Tractor Hook-Up Tractor Hook-UpTrail-Type Tractor Hook-Up Check Chains Safety ChainsTransporting Operating ChecklistOperating Check List Cutting InstructionsLeveling Procedure Lift-Type CutterNominal Cutting Height Single Tailwheel Cutter Height AdjustmentTrail-Type Lift Selections Dual TailwheelDeck Attitude Adjustment Lift-TypeTrail-Type Service Cutting Blades MaintenanceClutch Run-In Driveline ClutchStorage Clutch Assembly and DisassemblyLubrication LubricationTailwheel Spindle Tube Tailwheel HubDriveline Driveline U-JointsRatchet Jack Inner Tube BearingRCR2584 Rotary Cutter Specifications and CapacitiesTroubleshooting Problem Cause Solution Excessive vibration Torque Values Chart for Common Bolt Sizes 28 RCR2584 Rotary Cutter 312-459M 14/08 Hydraulic Cylinder One year Parts and Labor WarrantyCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA
Related manuals
Manual 94 pages 51.59 Kb

RCR2584 specifications

The Land Pride RCR2584 is a robust rotary cutter designed for heavy-duty applications, making it an essential tool for landowners, farmers, and landscapers alike. This rotary cutter is known for its ability to effortlessly tackle thick vegetation, ensuring that properties remain well-maintained and aesthetically pleasing. One of its main features is its cutting width of 84 inches, allowing users to cover large areas in a single pass, thereby saving both time and effort during land management tasks.

Equipped with a powerful gear-driven transmission, the RCR2584 exhibits exceptional durability and strength. This feature is crucial for cutting through tough brush and overgrown grass, as it provides reliable performance even under challenging conditions. The design of the cutter includes a heavy-duty, reinforced frame, which contributes to its robust construction, ensuring that it can withstand the rigors of daily use without compromising performance or safety.

The deck of the RCR2584 features a smooth underside, which prevents grass buildup and enhances the cutter's cutting efficiency. Additionally, this rotary cutter boasts a dual-blade design, allowing for cleaner cuts and improved mulching capabilities. The heavy-duty blade mounts add to the overall durability of the system, ensuring that the blades maintain their position while cutting through dense materials.

For enhanced stability, the RCR2584 includes side skids, which help adjust the cutting height and ensure a smooth, even result across varied terrain. Operators can easily adjust the cutting height as needed, making the cutter versatile for different environments and mowing conditions. Furthermore, the solid 3-point hitch design secures the cutter to tractors, providing a safe and stable connection.

In terms of safety features, the RCR2584 incorporates chain shields that help contain debris, reducing the risk of projectiles while operating. The heavy-duty construction of this rotary cutter not only ensures longevity but also provides peace of mind for operators concerned about safety.

The Land Pride RCR2584 rotary cutter is truly a top-tier solution for those needing reliable land management tools. Its impressive features, advanced technology, and sturdy design make it a valuable investment for maintaining properties and managing landscapes effectively. With this cutter in your arsenal, you can conquer the toughest jobs with confidence.
Top Page Image Contents