Land Pride RCR2584 manual Lubrication, Tailwheel Spindle Tube, Tailwheel Hub, Gearbox

Page 24

Table of Contents

Section 4 Maintenance and Lubrication

Land Pride

Lubrication

Lubrication

Legend

Multipurpose

Multipurpose

Multipurpose

50

spray lube

grease lube

oil lube

Intervals at which lubrication is required

13753

13753

14269

24

Tailwheel Spindle Tube

Type of Lubrication: Grease

Quantity = 6 pumps

8

Tailwheel Hub

The tailwheel hub is equipped with a relief hole located directly opposite the grease fitting. The relief hole re- leases pressure from inside the hub casting when it is greased. The hub should be greased until grease purg- es from the relief hole.

Type of Lubrication: Multipurpose Grease

Quantity = Until grease purges from the relief hole

8

Gearbox

Check oil level in the gearbox by removing the side plug in the gearbox case. If the oil level is low, remove the top plug in the gearbox case and fill with EP90 oil until oil flows from the side port of gearbox case. Reinstall plugs and tighten.

NOTE: Do not overfill! Cutter should be level when checking oil.

Type of Lubrication: EP90 Oil

Quantity = fill until oil flows from the side port of gearbox case.

22 RCR2584 Rotary Cutter 312-459M

7/14/08

Image 24
Contents Operator’st ’s Manuall Rotary CutterTable of Contents Be Aware of Signal Words Keep Riders Off MachineryFor Your Protection Shutdown and StorageUse Safety Lights and Devices Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentTable of Contents Safety Labels 818-130C 818-187C818-230C 818-540C818-552C 818-830C 838-094CUsing This Manual Owner AssistancePoint Hitch Assembly Point Quick Hitch AssemblyDriveline Installation Tractor RequirementsSingle Tailwheel Assembly Dual Tailwheel AssemblyHitch Assembly Trail-Type CutterSafety Guards Axle AssemblyRear Chain Guard Front Chain GuardTractor Hook-Up Point Tractor Hook-UpTrail-Type Tractor Hook-Up Safety Chains Check ChainsOperating Checklist TransportingOperating Check List Cutting InstructionsLeveling Procedure Lift-Type CutterNominal Cutting Height Cutter Height Adjustment Single TailwheelDual Tailwheel Trail-Type Lift SelectionsDeck Attitude Adjustment Lift-TypeTrail-Type Maintenance Service Cutting BladesClutch Run-In Driveline ClutchClutch Assembly and Disassembly StorageLubrication LubricationTailwheel Spindle Tube Tailwheel HubDriveline U-Joints DrivelineRatchet Jack Inner Tube BearingSpecifications and Capacities RCR2584 Rotary CutterTroubleshooting Problem Cause Solution Excessive vibration Torque Values Chart for Common Bolt Sizes 28 RCR2584 Rotary Cutter 312-459M 14/08 Warranty Hydraulic Cylinder One year Parts and LaborCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA
Related manuals
Manual 94 pages 51.59 Kb

RCR2584 specifications

The Land Pride RCR2584 is a robust rotary cutter designed for heavy-duty applications, making it an essential tool for landowners, farmers, and landscapers alike. This rotary cutter is known for its ability to effortlessly tackle thick vegetation, ensuring that properties remain well-maintained and aesthetically pleasing. One of its main features is its cutting width of 84 inches, allowing users to cover large areas in a single pass, thereby saving both time and effort during land management tasks.

Equipped with a powerful gear-driven transmission, the RCR2584 exhibits exceptional durability and strength. This feature is crucial for cutting through tough brush and overgrown grass, as it provides reliable performance even under challenging conditions. The design of the cutter includes a heavy-duty, reinforced frame, which contributes to its robust construction, ensuring that it can withstand the rigors of daily use without compromising performance or safety.

The deck of the RCR2584 features a smooth underside, which prevents grass buildup and enhances the cutter's cutting efficiency. Additionally, this rotary cutter boasts a dual-blade design, allowing for cleaner cuts and improved mulching capabilities. The heavy-duty blade mounts add to the overall durability of the system, ensuring that the blades maintain their position while cutting through dense materials.

For enhanced stability, the RCR2584 includes side skids, which help adjust the cutting height and ensure a smooth, even result across varied terrain. Operators can easily adjust the cutting height as needed, making the cutter versatile for different environments and mowing conditions. Furthermore, the solid 3-point hitch design secures the cutter to tractors, providing a safe and stable connection.

In terms of safety features, the RCR2584 incorporates chain shields that help contain debris, reducing the risk of projectiles while operating. The heavy-duty construction of this rotary cutter not only ensures longevity but also provides peace of mind for operators concerned about safety.

The Land Pride RCR2584 rotary cutter is truly a top-tier solution for those needing reliable land management tools. Its impressive features, advanced technology, and sturdy design make it a valuable investment for maintaining properties and managing landscapes effectively. With this cutter in your arsenal, you can conquer the toughest jobs with confidence.