Land Pride RCR2584 manual Dual Tailwheel, Trail-Type Lift Selections

Page 20

Table of Contents

Section 3 Adjustments

Land Pride

Dual Tailwheel

Refer to Figure 3-5:

1.If the cutting height is too high or too low, the tailwheel must be adjusted as follows:

a. Use the tractors 3-point hydraulic control to lift the

cutter such that the tailwheel clears the ground surface.

b.Remove attaching hardware; 1/2” -13 x 3 1/2" long bolt (#1), 1/2” lock washer (#2) and 1/2” nut (#3).

c.Adjust the tailwheel up or down to the desired cut- ting height and replace the attaching hardware.

14388

Dual Tailwheel Height Adjustment

Figure 3-5

Trail-Type Lift Selections

The trail-type unit can be equipped with a ratchet jack (#1), or hydraulic cylinder (#2). The hydraulic selection includes stroke control spacers (#3) to set cutting height. Stroke control spacers (#3) consist of cast steel halves and a

spring clip. To install or remove, simply raise or lower im- plement with tractor hydraulics and pull stroke control valves apart. Store stroke control spacers on hydraulic hose (#4) near hydraulic cylinder. Refer to Figure 3-6.

Trail-Type Lift Selections

Figure 3-6

14390

 

18 RCR2584 Rotary Cutter 312-459M

7/14/08

Image 20
Contents Operator’st ’s Manuall Rotary CutterTable of Contents Be Aware of Signal Words Keep Riders Off MachineryFor Your Protection Shutdown and StorageUse Safety Lights and Devices Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentTable of Contents Safety Labels 818-130C 818-187C818-552C 818-230C818-540C 818-830C 838-094CUsing This Manual Owner AssistancePoint Hitch Assembly Point Quick Hitch AssemblyDriveline Installation Tractor RequirementsSingle Tailwheel Assembly Dual Tailwheel AssemblyHitch Assembly Trail-Type CutterSafety Guards Axle AssemblyRear Chain Guard Front Chain GuardTractor Hook-Up Point Tractor Hook-UpTrail-Type Tractor Hook-Up Safety Chains Check ChainsOperating Checklist TransportingOperating Check List Cutting InstructionsNominal Cutting Height Leveling ProcedureLift-Type Cutter Cutter Height Adjustment Single TailwheelDual Tailwheel Trail-Type Lift SelectionsTrail-Type Deck Attitude AdjustmentLift-Type Maintenance Service Cutting BladesClutch Run-In Driveline ClutchClutch Assembly and Disassembly StorageLubrication LubricationTailwheel Spindle Tube Tailwheel HubDriveline U-Joints DrivelineRatchet Jack Inner Tube BearingSpecifications and Capacities RCR2584 Rotary CutterTroubleshooting Problem Cause Solution Excessive vibration Torque Values Chart for Common Bolt Sizes 28 RCR2584 Rotary Cutter 312-459M 14/08 Warranty Hydraulic Cylinder One year Parts and LaborCorporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA
Related manuals
Manual 94 pages 51.59 Kb

RCR2584 specifications

The Land Pride RCR2584 is a robust rotary cutter designed for heavy-duty applications, making it an essential tool for landowners, farmers, and landscapers alike. This rotary cutter is known for its ability to effortlessly tackle thick vegetation, ensuring that properties remain well-maintained and aesthetically pleasing. One of its main features is its cutting width of 84 inches, allowing users to cover large areas in a single pass, thereby saving both time and effort during land management tasks.

Equipped with a powerful gear-driven transmission, the RCR2584 exhibits exceptional durability and strength. This feature is crucial for cutting through tough brush and overgrown grass, as it provides reliable performance even under challenging conditions. The design of the cutter includes a heavy-duty, reinforced frame, which contributes to its robust construction, ensuring that it can withstand the rigors of daily use without compromising performance or safety.

The deck of the RCR2584 features a smooth underside, which prevents grass buildup and enhances the cutter's cutting efficiency. Additionally, this rotary cutter boasts a dual-blade design, allowing for cleaner cuts and improved mulching capabilities. The heavy-duty blade mounts add to the overall durability of the system, ensuring that the blades maintain their position while cutting through dense materials.

For enhanced stability, the RCR2584 includes side skids, which help adjust the cutting height and ensure a smooth, even result across varied terrain. Operators can easily adjust the cutting height as needed, making the cutter versatile for different environments and mowing conditions. Furthermore, the solid 3-point hitch design secures the cutter to tractors, providing a safe and stable connection.

In terms of safety features, the RCR2584 incorporates chain shields that help contain debris, reducing the risk of projectiles while operating. The heavy-duty construction of this rotary cutter not only ensures longevity but also provides peace of mind for operators concerned about safety.

The Land Pride RCR2584 rotary cutter is truly a top-tier solution for those needing reliable land management tools. Its impressive features, advanced technology, and sturdy design make it a valuable investment for maintaining properties and managing landscapes effectively. With this cutter in your arsenal, you can conquer the toughest jobs with confidence.