Marantz SR8002, SR7002 manual Read Before Operating Equipment, AC Polarized Plug

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.

Read Instructions – All the safety and

 

operating instructions should be read before

 

the product is operated.

2.

Retain Instructions – The safety and

 

operating instructions should be retained for

 

future reference.

3.

Heed Warnings – All warnings on the product

 

and in the operating instructions should be

 

adhered to.

4.

Follow Instructions – All operating and use

 

instructions should be followed.

5.

Cleaning – Unplug this product from the

 

wall outlet before cleaning. Do not use liquid

 

cleaners or aerosol cleaners. Use a damp

 

cloth for cleaning.

6.

Attachments – Do not use attachments not

 

recommended by the product manufacturer

 

as they may cause hazards.

7.

Water and Moisture – Do not use this product

 

near water-for example, near a bath tub,

 

wash bowl, kitchen sink, or laundry tub, in a

 

wet basement, or near a swimming pool, and

 

the like.

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.

Ventilation – Slots and openings in the

 

cabinet are provided for ventilation and to

 

ensure reliable operation of the product and

 

to protect it from overheating, and these

 

openings must not be blocked or covered.

 

The openings should never be blocked by

 

placing the product on a bed, sofa, rug, or

 

other similar surface. This product should not

 

be placed in a built-in installation such as a

 

bookcase or rack unless proper ventilation is

 

provided or the manufacturer’s instructions

 

have been adhered to.

11.

Power Sources – This product should be

 

operated only from the type of power source

 

indicated on the marking label. If you are

 

not sure of the type of power supply to your

 

home, consult your product dealer or local

 

power company. For products intended to

 

operate from battery power, or other sources,

 

refer to the operating instructions.

12.

Grounding or Polarization – This product may

 

be equipped with a polarized alternatingcurrent

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

8. Accessories – Do not place this product on

an unstable cart, stand, tripod, bracket, or

table. The product may fall, causing serious

injury to a child or adult, and serious damage

to the product. Use only with a cart, stand,

tripod, bracket, or table recommended by the

manufacturer, or sold with the product. Any

mounting of the product should follow the

manufacturer’s instructions, and should use

a mounting accessory recommended by the

manufacturer.

line plug (a plug having one blade wider than

the other). This plug will fit into the power

outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should

still fail to fi t, contact your electrician to replace

your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

AC POLARIZED PLUG

Image 2
Contents Model SR7002/SR8002 User Guide Read Before Operating Equipment AC Polarized PlugNEC National Electrical Code Introduction Accessories CheckRemote Controller RC8001SR User GuideTable of Contents FeaturesDescription Copyright ProtectionHdcd Dts Neo6 THX Select2Dts Digital Surround Dts Digital Surround ESAbout Dolby Pro Logic Before USE Battery Replacement Interval RC8001SR Operation of Remote ControllerRemote Control Loading BatteriesAUDIO/ Video Names and FunctionFront Panel FL Display and Indicater 0AC Outlets Rear PanelMulti Speaker / Speaker C Output@3VIDEO IN/OUT TV, DVD, VCR1, DSS/VCR2 Remote Control@1AUDIO IN/OUT TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR @4HDMI Input / OutputLCD Indicators RC8001SR General Information of RC8001SR to the Unit Setting the TimeTuner Mode Checking the TimePause Controlling Marantz ComponentsStop Exits the programming menu Turns the VCR on and offCall up the menu RecordTurns the Tape deck on Dock connector onDock connector OFF Turns the Tape deck offEntering and Setting the Manufacturer Number Di- rectly USE ModePreset Mode Setting Equipment Not Appearing in Manufacturer Number ListTons and Numeric Buttons When OKProgramming the 2 Play and Other Control But Programming the Direct Buttons and Rewriting NamesErasing Direct Button Pages Erasing Programmed Codes Returning to Initial SettingsErasing Buttons and Erasing Direct Buttons Erasing SourcesProgramming Macros Programming MacrosErasing All Executing Macro ProgramsErasing Steps of Macro Programs When clearing macros, the macros programmed toInserting Steps in Macro Programs Overwriting Steps in Macro ProgramsClone Mode Setting the Macro Interval Time SetupSetting the Lighting Time Adjusting the Display ContrastOperation RC101 ⁄2 DISC+/T.MODEZone a Multi room a control Zone B Multi room B control General Information of RC101 to the UnitControlling a Marantz TV TV Zone D Main room controlControlling a Marantz Tuner T1 Controlling a Marantz VCR Deck VCR1/ VCR2Controlling a Marantz Satellite Broadcasting Tuner DSS Controlling a Marantz DVD Player DVDControlling a Marantz Universal Dock AUX1 Enter 3CURSOR 4CURSOR 2CURSOR 1CURSORResetting the Code Normal ModeSetting the Back Light Programming with the 4-DIGIT CodeLearn Mode Learning ProcedureCopying entire contents Change the Multi Room Control Commands for Each ZoneCreating copies using clone mode Other OperationsConnecting Speaker Wire Speaker PlacementConnecting Speakers ConnectionsConnecting Audio Components Connecting a SubwooferVideo jack Connecting Video ComponentsVIDEO, S-VIDEO, Component Jacks Component jackHdmi Jack Connecting Hdmi ComponentsConnecting Hdmi Components Connecting AN External Power Amplifier Advanced ConnectingConnecting Multi Channel Audio Source Connecting the Antenna Terminals See the Checking the XM Signal Strength and Radio ID Connecting the XM CONNECT-AND-PLAY AntennaHow to Subscribe XM Radio OverviewMultiroom B Connecting for the Multi RoomConnecting for Speaker C USE Multiroom aEmitter OUT SR8002 Only Connecting Other EquipmentDC OUT DC Trigger FlasherSetup Onscreen Display Menu SystemSpeaker Setup P Input Setup PSurround Setup P SUB MenuCH Input Setup Input SetupFunc Input Setup Func RenameFunc Input Setup Assignable Digital Input 7.1 CH Input SetupBack DefaultFunction Rename SpaceManual Setup Spkr Speaker SetupAuto Setup THX Audio SetupAutomatically optimizes settings Auto Setup MultEQ Setup featureUnit measures sound characteristics To do this, the Auto Setup feature measures aExample Confirmation screen for speaker detection OK/ENTER buttonError Messages Cause How to RemedySpeaker Distance Manual SetupSpeaker Size Advanced Speaker Array ASA THX Audio SetupSpeaker Level Speaker type and positioningSurround Setup Channel LevelNEO6 Parameter PLIIx PRO Logic IIx Music ParameterCsiiparameter Video Setup Video ConvertPreference Multi Room Setup DC Trigger SetupAcoustic EQ Check Auto Preset G. EQ ADJReset FrequencyUsing the remote controller Selecting the Surround ModeUsing the unit Dialogue Normalization MessageVideo Convert Adjusting the Tone Bass & Treble ControlUsing the Sleep Timer Convert Surround ModeFor setting instructions, see SBR Pure Direct AutoSource Direct EX/ESMulti CH. MOVIE, Music StereoTHX Games THX CinemaSelecting Analog Audio Input or Digital Audio Input Listening Through HeadphonesRecording AN Analog Source Speaker A/B Dolby Headphone ModeAttenuation to Analog Input Signal CH InputVideo ON/OFF Dual Backup MemoryAUX2 Input LIP.SYNCBasic Operation Auto TuningManual Tuning Listening to the TunerAuto Preset Memory Preset MemoryFM Tuning Mode Auto Stereo or Mono Manual Preset MemorySorting Preset Stations Recalling a Preset StationPreset Channel List Display Clearing Stored Preset StationsThan 2 seconds Analog/Digital Auto ModeFor Listening to HD Radio Stations SR8002 only → B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP →Signal Strong HD Radio Auto TuningSwitching HD-RADIO Information Inthe Front Using the SR8002Multicast Channels Selecting Multicast ChannelsPTY Auto Search Press the SCAN+ D1 or SCAN- D2 buttonRadio Text When the Text 1 Radio Text is displayedRbds Operation SR8002 only Rbds DisplaySignal NON Switching XM Information in the Front Panel DisplaySignal Marginal Listening to XM Satellite RadioALL Channel Search Mode Search ModePreset Search Mode When the Artist name/Song title is displayedFM/AM stations You can store the desired channel in the PresetMemory Tune into the desired channelNeural Surround Mode Room OUT Terminals Multi Room Playback Using the MultiMulti Room System Speaker TerminalsRC101 for Multiroom a Power ON/OFFTuner mode operation remote code Refer to RC101 for Multiroom BSpeaker TroubleshootingSymptom Cause Remedy XM Satellite Radio Symptom Cause RemedyHdmi HD Radio ReceptionDimensions AccessoriesHOW to Reset the Unit Front KEY Button Lock of the UnitRECEIVER/TUNER Setup CodesAmplifier RECEIVER/TUNER Cable SatelliteTape Deck CD/CD-R Player Laser DiskIii VCR Source button name TV Source button name VCRVCR DVD Source button name VCR Source button name DVDDirect Button 1059 11411002, 1009 1117DSS Is a registered trademark
Related manuals
Manual 94 pages 53.69 Kb

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.