Page 22
The USE indicator displays on the LCD, and the newly stored codes can be used.
The input is overwritten, and so the currently displayed text is erased.
Up to six characters can be entered for the direct button indicator.
Press the M button .
When finished entering the text, press the OK cursor button .
Follow the same procedure to enter U, N, and D.
Press the 5 numeric button to select 0.
9. Press the 2 cursor button to move the flashing section.
10.
11.
12.
13.
6. Press the 1 or 2 cursor button . The letter is changed to “A”.
• The 3 and 4 cursor buttons can be used to move the blinking indicator of the section to be rewritten.
7. Press the 3 or 4 cursor buttons to select AUDIO on the direct button indicator. The A fl ashes to indicate that the name can be changed.
8. Press the 7 numeric button to select S.
Each time the button is pressed, the button cycles through S → T → U → 7 → S.
3. Press the DVD source button .
The NAME indicator blinks.
The “ ” blinks to indicate that the letter can be changed.
4. Press the 2 cursor button twice.
The D in DVD blinks to indicate that the letter can be changed.
5. Press the 1 numeric button to select A.
Each time the numeric buttons are pressed, the button cycles through the alphanumeric characters shown below.
1:A → B → C → 1 → A
2:D → E → F → 2 → D
3:G → H → I → 3 → G
4:J → K → L → 4 → J
5:M → N → O → 5 → M
6:P → Q → R → 6 → P
7:S → T → U → 7 → S
8:V → W → X → 8 → V
9:Y → Z → / → 9 → Y
0:SPACE ( ) → + → — → , → ’ → < → > → ? → 0 → SPACE ( )
ERASING PROGRAMMED CODES
(RETURNING TO INITIAL SETTINGS)
Codes can be erased in five ways: by buttons, direct buttons, direct button pages, sources, and by all memory contents.
Erasing Buttons and Erasing Direct Buttons
This example shows how to erase the code learned from the PLAY button of the DVD player and the AUTO code of the AMP direct button.
Erasing buttons
1 | | 3 | | 4 | | |
LEARN | | | LEARN | | | LEARN | | |
NAME | | | NAME | | | NAME | | |
MACRO | | | MACRO | | | MACRO | | |
USE | PAGE 1 2 3 4 | | USE | PAGE 1 2 3 4 | | USE | PAGE | 1 2 3 4 |
| | |
| | | | | | | | |
1. Hold down the M button for three seconds or more.
The menu is displayed.
2. Press the D5 (ERASE) direct button .
3. Press the DVD source button .
The USE and LEARN indicators blink.
6. Press the AMP source button .
7. Press the > button to display the first page for AMP.
8. Press the D1 (AUTO) direct button to be erased while holding down the CLEAR button .
9. Press the D4 (YES) direct button to erase.
The code programmed to the AUTO button is erased.
When the code is cleared, the code for this button resets to the factory default code or becomes blank. The rewritten name returns to the original name.
•To cancel the erasing operation, press the D5 (NO) button to return to the previous screen.
10. When the erasing operation is finished, press the M button .
The USE indicator displays to indicate that the remote controller can now be operated.
Erasing Direct Button Pages
This example shows how to erase the entire direct button second page learned from the DVD player.
6. | original name. | ENGLISH |
Press the D4 (YES) direct button to erase. | |
All codes and names programmed to page 2 are erased. When the codes are cleared, the codes for this button reset to the factory default code or become blank. Any rewritten names return to the
•To cancel the erasing operation, press the D5 (NO) button to return to the previous screen.
7.When the erasing operation is finished, press the M button .
The USE indicator lights up to indicate that the remote controller can now be operated.
Erasing Sources
This procedure clears all codes and names programmed to the DVD, TV, or other sources. All codes and names in the four direct button pages are also erased.
This example shows how to erase the names and codes learned from the DVD player.
1 | | 3 | | 4 |
LEARN | LEARN | | LEARN |
NAME | NAME | | NAME |
MACRO | MACRO | | MACRO |
4. Press the button 2 (PLAY) that you want to erase while holding down the CLEAR button .
A message is displayed on the LCD.
5. Press the D4 (YES) direct button to erase. The code programmed to the 2 (PLAY) button is
erased.
When the code is cleared, the code for this button resets to the factory default code or becomes blank.
• To cancel the erasing operation, press the |
D5 (NO) button to return to the previous |
display. |
To erase codes programmed for the CLEAR |
LEARN
NAME
MACRO
USEPAGE 1 2 3 4
5
LEARN
NAME
MACRO
USEPAGE 1 2 3 4
LEARN
NAME
MACRO
USEPAGE 1 2 3 4
LEARN
NAME
MACRO
USEPAGE 1 2 3 4
USE | PAGE 1 2 3 4 | USE | PAGE 1 2 3 4 | USE | PAGE 1 2 3 4 |
1. Hold down the M button for three seconds or more.
The menu is displayed.
2. Press the D5 (ERASE) direct button .
3. Press the DVD source button .
The USE and LEARN indicators blink.
4. Press the DVD source button while holding down the CLEAR button .
button, simply press the CLEAR button |
twice. |
To erase codes programmed for the |
SOURCE button, simply press the SOURCE |
button twice. |
Erasing direct buttons
1. Hold down the M button for three seconds or more.
The menu is displayed.
2. Press the D5 (ERASE) direct button .
3. Press the DVD source button .
The USE and LEARN indicators blink.
4. Press the > button to display the second page.
5. Press the > button while holding down the CLEAR button .
5. Press the D4 (YES) direct button to erase.
All codes and names programmed to the DVD source are erased. When the codes are cleared, the codes for this button reset to the factory default code or become blank. Any rewritten names return to the original name.
• To cancel the erasing operation, press the |
D5 (NO) button to return to the previous |
display. |
6. When the erasing operation is finished, press |
the M button . |
The USE indicator displays to indicate that the |
LEARN | LEARN |
LEARN |
NAME | NAME |
NAME |
MACRO | MACRO |
MACRO |
USE | PAGE 1 2 3 4 | USE | PAGE 1 2 3 4 | USE | PAGE 1 2 3 4 |
remote controller can now be operated. |
Contents
Model SR7002/SR8002 User Guide
Read Before Operating Equipment
AC Polarized Plug
NEC National Electrical Code
Introduction
Accessories Check
Remote Controller RC8001SR
User Guide
Table of Contents
Features
Hdcd
Copyright Protection
Description
Dts Neo6
THX Select2
Dts Digital Surround
Dts Digital Surround ES
About Dolby Pro Logic
Before USE
Battery Replacement Interval RC8001SR
Operation of Remote Controller
Remote Control
Loading Batteries
Front Panel
Names and Function
AUDIO/ Video
FL Display and Indicater
0AC Outlets
Rear Panel
Multi Speaker / Speaker C
Output
@3VIDEO IN/OUT TV, DVD, VCR1, DSS/VCR2
Remote Control
@1AUDIO IN/OUT TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR
@4HDMI Input / Output
LCD Indicators RC8001SR
General Information of RC8001SR to the Unit
Setting the Time
Tuner Mode
Checking the Time
Stop
Controlling Marantz Components
Pause
Exits the programming menu
Turns the VCR on and off
Call up the menu
Record
Turns the Tape deck on
Dock connector on
Dock connector OFF
Turns the Tape deck off
Entering and Setting the Manufacturer Number Di- rectly
USE Mode
Preset Mode
Setting Equipment Not Appearing in Manufacturer Number List
Tons and Numeric Buttons
When OK
Programming the 2 Play and Other Control But
Programming the Direct Buttons and Rewriting Names
Erasing Direct Button Pages
Erasing Programmed Codes Returning to Initial Settings
Erasing Buttons and Erasing Direct Buttons
Erasing Sources
Programming Macros
Programming Macros
Erasing All
Executing Macro Programs
Erasing Steps of Macro Programs
When clearing macros, the macros programmed to
Inserting Steps in Macro Programs
Overwriting Steps in Macro Programs
Clone Mode
Setting the Macro Interval Time
Setup
Setting the Lighting Time
Adjusting the Display Contrast
Operation RC101
⁄2 DISC+/T.MODE
Zone a Multi room a control Zone B Multi room B control
General Information of RC101 to the Unit
Controlling a Marantz TV TV
Zone D Main room control
Controlling a Marantz Tuner T1
Controlling a Marantz VCR Deck VCR1/ VCR2
Controlling a Marantz Satellite Broadcasting Tuner DSS
Controlling a Marantz DVD Player DVD
Controlling a Marantz Universal Dock AUX1
Enter 3CURSOR 4CURSOR 2CURSOR 1CURSOR
Resetting the Code
Normal Mode
Setting the Back Light
Programming with the 4-DIGIT Code
Learn Mode
Learning Procedure
Copying entire contents
Change the Multi Room Control Commands for Each Zone
Creating copies using clone mode
Other Operations
Connecting Speaker Wire
Speaker Placement
Connecting Speakers
Connections
Connecting Audio Components
Connecting a Subwoofer
Video jack
Connecting Video Components
VIDEO, S-VIDEO, Component Jacks
Component jack
Connecting Hdmi Components
Connecting Hdmi Components
Hdmi Jack
Connecting Multi Channel Audio Source
Advanced Connecting
Connecting AN External Power Amplifier
Connecting the Antenna Terminals
See the Checking the XM Signal Strength and Radio ID
Connecting the XM CONNECT-AND-PLAY Antenna
How to Subscribe
XM Radio Overview
Multiroom B
Connecting for the Multi Room
Connecting for Speaker C USE
Multiroom a
Emitter OUT SR8002 Only
Connecting Other Equipment
DC OUT DC Trigger
Flasher
Setup
Onscreen Display Menu System
Speaker Setup P
Input Setup P
Surround Setup P
SUB Menu
CH Input Setup
Input Setup
Func Input Setup
Func Rename
Func Input Setup Assignable Digital Input
7.1 CH Input Setup
Back
Default
Function Rename
Space
Manual Setup
Spkr Speaker Setup
Auto Setup
THX Audio Setup
Automatically optimizes settings
Auto Setup MultEQ Setup feature
Unit measures sound characteristics
To do this, the Auto Setup feature measures a
Example Confirmation screen for speaker detection
OK/ENTER button
Error Messages
Cause How to Remedy
Speaker Size
Manual Setup
Speaker Distance
Advanced Speaker Array ASA
THX Audio Setup
Speaker Level
Speaker type and positioning
Surround Setup
Channel Level
Csiiparameter
PLIIx PRO Logic IIx Music Parameter
NEO6 Parameter
Video Setup
Video Convert
Preference
Multi Room Setup
DC Trigger Setup
Acoustic EQ
Check Auto
Preset G. EQ ADJ
Reset
Frequency
Using the remote controller
Selecting the Surround Mode
Using the unit
Dialogue Normalization Message
Using the Sleep Timer
Adjusting the Tone Bass & Treble Control
Video Convert
For setting instructions, see
Surround Mode
Convert
SBR
Pure Direct
Auto
Source Direct
EX/ES
Multi CH. MOVIE, Music
Stereo
THX Games
THX Cinema
Recording AN Analog Source
Listening Through Headphones
Selecting Analog Audio Input or Digital Audio Input
Speaker A/B
Dolby Headphone Mode
Attenuation to Analog Input Signal
CH Input
Video ON/OFF
Dual Backup Memory
AUX2 Input
LIP.SYNC
Basic Operation
Auto Tuning
Manual Tuning
Listening to the Tuner
Auto Preset Memory
Preset Memory
FM Tuning Mode Auto Stereo or Mono
Manual Preset Memory
Sorting Preset Stations
Recalling a Preset Station
Preset Channel List Display
Clearing Stored Preset Stations
Than 2 seconds
Analog/Digital Auto Mode
For Listening to HD Radio Stations SR8002 only
→ B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP →
Signal Strong
HD Radio Auto Tuning
Switching HD-RADIO Information Inthe Front
Using the SR8002
Multicast Channels
Selecting Multicast Channels
PTY Auto Search
Press the SCAN+ D1 or SCAN- D2 button
Radio Text
When the Text 1 Radio Text is displayed
Rbds Operation SR8002 only
Rbds Display
Signal NON
Switching XM Information in the Front Panel Display
Signal Marginal
Listening to XM Satellite Radio
ALL Channel Search Mode
Search Mode
Preset Search Mode
When the Artist name/Song title is displayed
FM/AM stations
You can store the desired channel in the Preset
Memory
Tune into the desired channel
Neural Surround Mode
Room OUT Terminals
Multi Room Playback Using the Multi
Multi Room System
Speaker Terminals
RC101 for Multiroom a
Power ON/OFF
Tuner mode operation remote code Refer to
RC101 for Multiroom B
Symptom Cause Remedy
Troubleshooting
Speaker
XM Satellite Radio
Symptom Cause Remedy
Hdmi
HD Radio Reception
Dimensions
Accessories
HOW to Reset the Unit
Front KEY Button Lock of the Unit
RECEIVER/TUNER
Setup Codes
Amplifier
RECEIVER/TUNER Cable Satellite
Tape Deck CD/CD-R Player
Laser Disk
Iii
VCR
Source button name TV Source button name VCR
VCR DVD
Source button name VCR Source button name DVD
Direct Button
1059
1141
1002, 1009
1117
DSS
Is a registered trademark