Marantz SR8002 HD Radio Auto Tuning, Panel FL Display, Switching HD-RADIO Information Inthe Front

HD RADIO AUTO TUNING

1.

SWITCHING HD-RADIO INFORMATION INTHE FRONT

PANEL FL DISPLAY

You can display HD Radio information (such as station name, artist name/song title or signal status)

• When the unit receives a broadcast with multicast

channels, the multicast program number (HD 1) is

displayed to the right of the station name displayed

on the FL display.

When (HD 1) is displayed, you can select the multicast

CHECKING THE HD Radio SIGNAL STRENGTH

H D S I G : 7 7 7 7 7 7

ENGLISH

SURROUND

DIGITAL

AAC

CHVOL

OK 1.

for the channel currently selected in the front panel FL display.

channel. (See p.72 for information on multicast

channels.)

•The HD Radio signal strength of the FL display changes as shown below according to the receiving condition.

LIP.SYNC

PREVMUTE

GUIDE

MENUEXIT

POWER

OFF ON/OFF

SOURCE

ON

M

D1

D2

2.

When the Text 1 (Artist name) is displayed:

T X T 1

↓

HD SIG: ■■■■■■

SIGNAL: STRONG

(Signal strength is good)

HD SIG: ■■■■

You can use TUNING mode to scan for HD Radio stations.

(Using the SR8002)

USE PAGE 2 3 4

D3

D4

D5

1.

P i n k F l o i d

The “TXT1” is displayed for 2 seconds, followed by

SIGNAL: MARGINAL (Signal strength is Marginal)

HD SIG: ■■

1. Press the ENTER button on the front panel.

2. Automatic searching begins then stops when a station is tuned in.

(Using the remote controller)

1. Press the OK button on the remote controller.

2. Automatic searching begins then stops when a station is tuned in.

Notes:

•When TUNING mode is set to a mode other than Analog/Digital Auto mode (DIG-AT), TUNING mode automatically changes to Analog/Digital Auto mode.

•If tuning does not stop at the desired station, use manual tuning. (See p.67 for the manual tuning operation.)

1. Press the > button until PAGE 3 is displayed.

2. Select the information with the DISP (D1) button.

Auto display mode

Text 1 (artist name)

Text 2 (song title)

HD Radio signal strength

Frequency

When the auto display mode is displayed:

F M W X Y Z - F M HD 1

When the unit is tuned to an HD Radio station, the station name (call sign) is displayed on the FL display.

Notes:

•The station name is displayed if the text data from the HD Radio station can be received. If the signal from the radio station is weak, text data may be displayed intermittently or not all.

If the text data cannot be received, the frequency is displayed. The station name is displayed if it has been registered with the preset station name input function.

(See p.70 for information on the PRESET STATION NAME INPUT function.)

the artist’s name. If artist’s name is more than 13 characters long, the text is scrolled.

Notes:

•If the signal from an radio station is weak, text data may be displayed intermittently or not all.

•When the unit receives an analog broadcast not from an HD Radio station but from an RBDS station, the radio text is displayed on the FL display. (See p.73 for information on RBDS.)

When the Text 2(Song title) is displayed:

T X T 2

↓

M o n e y

The “TXT 2” is displayed for 2 seconds, followed by the song title. If song title is more than 13 characters long, the text is scrolled.

Notes:

•If the signal from an radio station is weak, text data may be displayed intermittently or not all.

•When the unit receives an analog broadcast not from an HD Radio station but from an RBDS station, the program service name is displayed on the FL display. (See p.73 for information on RBDS.)

SIGNAL: WEAK (Signal strength is poor)

HD SIG:

SIGNAL: NON (Loss of the signal)

71