Remote Control Unit RC7200SR, ⁄7TEN Keypad

REMOTE CONTROL UNIT RC7200SR

This chapter describes the functions which need to control the SR7200. See page 19 and following pages to refer other function of the RC7200SR.

cPOWER ON and OFF

These two buttons are use for turning on or off SR7200.

bLCD

Used to display information about currently selected modes and functions.

nJog Dial control

Rotate this dial to select commands displayed on the LCD for each function. (See page 26)

Refer to follow.

Function	Jog Dial command		Note
AMP	1 A/D		switches analog/digital input
	2	ATT	switches attenuator for analog input
	3	NIGHT	selects NIGHT mode for Dolby Digital
	4	MR-ON	turns multi-room mode on
	5	MR-OF	turns multi-room mode off
	6	7-DIR	activates 7-channel input
	7 TRB+		increases treble
	8 TRB-		decreases treble
	9	BAS+	increases bass
	0	BAS-	decreases bass
TUNER	1 FM		FM band
	2 AM		AM band
	3 LW		Long Wave band
	4 T-MOD		mono/stereo mode selector
⊗	5	SCAN	programmed preset channel scan
⊗	6 STM		selects station mode
⊗	7	F-DIR	inputs a frequency directly
⊗	8 PTY		selects PTY function
⊗	9	DISP	selects display function
⊗	0 DWR		selects DSR wave range

The marked “⊗” commands are not used for SR7200.

mENT buttons

Press this button to enter the selected command by the Jog Dial.

,FUNCTION buttons

Press one of these buttons twice within 2 seconds to select the input function of SR7200.

Press one of these buttons once to change the state of remote commander.

.VOLUME up / down buttons

These buttons are used to raise and lower the SR7200’s volume level.

⁄0CURSOR buttons

The cursor buttons can be used to navigate within on-screen menus of SR7200.

⁄2Channel up / down buttons

Used to controls the up/down function of tuner, or allows one to cycle through the tuner presets.

⁄3MUTE button

This button can be used to mute the sound temporarily.

⁄5CLEAR button

This button is used to cancel certain memory or programming operations.

⁄6MEMO button

This button is used to enter the tuner preset memory numbers and station names.

⁄7TEN KEYPAD

They are useful for tuning a pre-set radio station and setting a station name.

	OPERATION OF REMOTE CONTROL UNIT	ENGLISH
	1. Remote control	ENGLISH
	1. Remote control

The distance between the transmitter of the remote control unit and the IR SENSOR of the SR7200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.

Remote-controllable range

SR7200

60°

Remote control unit (RC7200SR)

2. Loading batteries

The life of the batteries used with the remote control unit is about 4 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak.

(1) Remove the back cover.

(2)Insert the new batteries (AA type) with correct (+) and (–) polarity.

(3) Close until it clicks.

SR7200 specifications

The Marantz SR7200 is a notable receiver that exemplifies high-quality audio performance coupled with advanced technology, making it a staple in home theater systems since its release. Designed for both music aficionados and home theater enthusiasts, the SR7200 offers a versatile array of features that enhance sound quality and user experience.

At the core of the SR7200 is a powerful amplification system, providing consumers with 110 watts per channel across seven channels. This ensures that users experience a robust and immersive sound, whether watching movies or listening to music. The receiver supports a wide range of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and even virtual surround sound options, which allow for a powerful audio experience that fills the room.

One of the standout features of the Marantz SR7200 is its extensive connectivity options. The receiver is equipped with multiple HDMI inputs, allowing users to connect various sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it has composite, component, and optical inputs, making it highly compatible with a multitude of devices. This wide array of inputs ensures that users can enjoy their favorite content without the hassle of switching cables.

The SR7200 also boasts advanced room calibration technology, which helps optimize audio performance according to the unique acoustics of the listening environment. Through the use of microprocessors, the receiver automatically adjusts speaker levels, equalization, and timing to ensure the best possible sound quality, regardless of room layout. This feature is particularly beneficial for novice users who may not have extensive knowledge of audio setup.

In terms of build quality, the Marantz SR7200 is constructed with attention to detail, featuring a solid chassis that is designed to minimize interference and reduce vibrations. The tonal balance is excellent, with crisp highs and deep, rich lows that enhance any audio playback.

Moreover, the receiver is user-friendly, with a nicely designed remote control and an intuitive on-screen setup process, making it accessible for everyone from beginners to seasoned audiophiles.

In summary, the Marantz SR7200 is a feature-rich A/V receiver that combines powerful amplification, multiple connectivity options, advanced audio processing technologies, and user-focused design. It remains a compelling choice for anyone seeking to enhance their home audio experience.