Marantz SR7200 manual Examples of Macro Programs, Clearing Macro Programs

ENGLISH	EXAMPLES OF MACRO PROGRAMS
	Example 1
	Change the input source for the amplifier to CD and play the 3rd track
	on a CD in the CD player.
	1. Use a ballpoint pen or other sharp point to press the MACRO
	button x, then press the CD Function button ,. CD-M is
	displayed on the LCD.
		POWER
		SOURCE
		ON ON / OFF OFF
		LEARNING REMOTE
		CONTROL RC 7200SR MACRO MODE

2.	Press CD ,, 3 ⁄7, and 3 ⁄0buttons.
	ENT					ENT
	CH			OK		VOL
	C D		DVD		CD-R/MD
	DSS	T V			VCR	AUX
	L D	TUNER		TAPE		AMP
	CLEAR	MEMO			GUIDE	MUTE
	AUTO			DTS	CS5.1	6.1
	1	2		3	4	5
	DSP	6-STEREO		2CH	OSD	SLEEP
	6	7		8	9	0

When you are finished programming the macro, use a ballpoint pen or other sharp point to press the MACRO button x.

POWER

SOURCE

ON ON / OFF OFF

LEARNING REMOTE

CONTROL RC 7200SR MACRO MODE

Now, execute the macro you just programmed.

1.Press the CD Function button , for 3 seconds.

C D	DVD		CD-R/MD
DSS	T V		VCR	AUX
L D	TUNER	TAPE		AMP
CLEAR	MEMO		GUIDE	MUTE
AUTO	DTS		CS5.1	6.1

1 2 3 4 5

2.The macro commands are transmitted to the components in order, and the names of the operations being performed are displayed on the LCD in order.

Example 2

Turn the main amplifier ON → Change the amplifier’s input source to DVD → Set the Surround mode to DOLBY → Switch the TV to video input → Set the DVD player to PLAY

1.Use a ballpoint pen or other sharp point to press the MACRO button x.

POWER

SOURCE

ON ON / OFF OFF

LEARNING REMOTE

CONTROL RC 7200SR MACRO MODE

2.Press the DVD Function button ,.

•Here the DVD Function button , is used as the macro button, but any function button can in fact be used.

3.To set the various steps of the macro, press the following buttons in order: POWER ON c, DVD ,, AMP* ,, 2 (DOLBY) ⁄7, TV* ,, VIDEO (use Jog Dial n to select VIDEO and press ENT button m) , DVD* ,, 3 ⁄0.

4.When you are finished programming the macro, use a ballpoint pen or other sharp point to press the MACRO button x. The remote controller returns to normal mode.

Now, execute the macro you just programmed.

1.Press the DVD Function button , for 3 seconds.

The macro commands are transmitted in order, and the names of the operations being performed are displayed on LCD a in order.

C D	DVD		CD-R/MD
DSS	T V		VCR	AUX
L D	TUNER	TAPE		AMP
CLEAR	MEMO		GUIDE	MUTE
AUTO	DTS		CS5.1	6.1

•When executing this macro, function operations AMP*, TV*, and DVD* only switch the command set of the remote controller and no signal is transmitted to the component.

•To cancel the transmission of a programmed macro, use the Cursor buttons ⁄0to press 7.

CLEARING MACRO PROGRAMS

The following procedure is used to erase macros you have programmed into the remote controller’s memory.

1.Press and hold the CLEAR button ⁄5, then the button for the function , to be cleared (in this case DVD) for 3 seconds. DVCL? will appear on LCD a. If you wish to continue the clearing operation, press the OK Cursor button ⁄0.

C D	DVD		CD-R/MD
DSS	T V		VCR	AUX
L D	TUNER	TAPE		AMP
CLEAR	MEMO		GUIDE	MUTE
AUTO		DTS	CS5.1	6.1
1	2	3	4	5
DSP 6-STEREO		2CH	OSD	SLEEP
6	7	8	9	0

•To cancel the memory clearing operation, do not press OK Cursor button ⁄0and simply touch any other button.

24