Marantz SR7200 manual OSD Main Menu, System Setup 2/3 Selecting the Digital Input, Example

OSD MAIN MENU

SYSTEM SETUP 2/3 (SELECTING THE DIGITAL INPUT)

ENGLISH

1.Press the AMP button ,.

2.Press OK button ⁄0to display the “MAIN MENU” of the on-screen display menu.

Choose a desired item in the contents with ^ or v button, and press the OK button to select.

Display will change to menu for each item.

SYSTEM SETUP

SYSTEM SETUP 1/3

7CH-INPUT :The 7 channel input of the SR7200 can be selected to use a 7channel input. Select 7 channel use by < or > button.

TV AUTO : This product is equipped with a TV-auto ON/ OFF system, which automatically turns on or off the power 1 second to 5 minutes after the TV video input signal has been sent or has been stopped.

Switch the TV AUTO ON/OFF function to enable or disable with < or > button.

To use this function, connect the TV video input to TV tuner’s video output.

NEXT SETUP/EXIT :If you desire to continue the next setup ,press the OK button on NEXT-SETUP, if you desire to exit from OSD menu system, press the OK button on EXIT.

Five digital inputs can be assigned for the desired source.

Use this menu to determine which source is connected to which input.

Example;

When the digital output of a DVD player is connected to Digital 4 (input jack) of the SR7200;

1.Move the cursor on the line of the DVD with cursor buttons ^ or v.

2.Press the the cursor < or > button until “DIG4” is displayed.

3.Press the OK button to chose.

4.If you desire to continue the next setup, press the OK button on

NEXT-SETUP.

If you desire to exit from OSD menu system, press the OK button on EXIT.

Notes:

The TUNER, VCR1, TAPE and AUX are assigned to the analog input, and are prevented from selecting any digital input.

While the DTS-LD or DTS-CD is playing, this setup is not available, this is to avoid noise being generated from the analog input. Stop the LD or CD playback to setup.

The SR7200 does not switch from digital input to analog input or vice versa automatically.

In the event that both digital and analog inputs are connected to SR7200, if you desire to switch to an analog input temporarily, you can switch by pressing the A/D button u.

SYSTEM SETUP 3/3 (DC CONTROL OUTPUT)

SR7200 has two DC control jacks, each one is selectable to link with input functions for the main room or multi room.

You can select MAIN ROOM, MULTI ROOM or OFF for DC1 & DC2 independently by < or > button.

And then press OK button and move the cursor to select the linked input function you desired by < or > button and press OK button to chose.