Karcher KMR 1250 B manual Shutting the sweeper down for longer periods, Overcoming obstacles

Page 14

KMR 1250 B

User Instructions

English

Shutting the sweeper down for longer periods

Picking up larger items (sticks, tins, etc.)

Caution!

When the bulk waste flap is open, stones or grit could be thrown at the front by the main brush. Make sure therefore that when you open the flap no persons, animals or property are endangered.

nOpen the bulk waste flap [ ] by pulling back the corresponding lever.

nDrive over the items to be picked up, at low speed and with the bulk waste flap open.

Note:

In order to avoid stirring up dust unnecessarily, close the bulk waste flap again as soon as possible.

Overcoming obstacles

Obstacles up to 5 cm in height

–can be driven over without any problems. Before you do so, open the bulk waste flap and raise the main brush.

Obstacles more than 5 cm in height

– can be only be driven over with the aid of a suitable ramp.

If you do not intend to use the sweeper for a longer period of time (e.g. during the winter), please observe the following.

nIt is most important that the main brush and side brush(es) are kept raised in order to avoid damage to the bristles.

nClean the interior and exterior of the sweeper.

nClose the fuel tap.

nChange the engine oil (see Chapter: “Maintenance”).

nStore the sweeper in a protected environment and ensure that it cannot roll away.

nRemove the ignition key.

nDisconnect the battery.

nCharge the battery with a suitable charger approx. every two months (see Chapter: “Maintenance”).

39

Page 13 Page 15
Image 14
Page 13 Page 15
Contents KMR 1250 B Ðúêîâîäñòâî çà ðàáîòà 128 Ñïèñúê íà ðåçåðâíè ÷àñòè 228 Contents User InstructionsFire hazard while sweeper is operating For your safetyExplosion hazard while refuelling On behalf of the environment Sweeping mechanism Intended usage Sweeper functionsMain components Filter systemAfter moving the machine Prior to initial start-upPushing the sweeper by hand Operating controls Filling the fuel tank Explosion hazard while refuelling Adjusting the driver’s seatPreparing the sweeper for use Opening the fuel tapMoving off and sweeping Starting the sweeperInitial driving trials Automatic cleaning Cleaning the filterStopping the sweeper and switching off Manual cleaningRisk of sweeper toppling over Emptying the waste hopperImportant information Injury hazard Sweeping on damp or wet ground Typical applicationsSweeping on dry ground Overcoming obstacles Shutting the sweeper down for longer periodsPicking up larger items sticks, tins, etc Cleaning and care Transporting the sweeperMaintenance intervals MaintenanceDaily maintenance First engine oil changeSafety information applicable to maintenance tasks Maintenance tasks Opening/closing the unit coverDisconnecting the battery TionallyOil Checking the hydraulic system Cleaning or replacing the air cleanerCleaning the fuel filter holder Safety information Replacing the sealing skirts Replacing the side brushOnly valid for main brush roller with fixed setting Adjusting the sweeping patternReplacing the main brush roller Replacing fuses Replacing the dust filtersTroubleshooting Fault Possible cause Remedy Engine does not startTechnical specifications IPX3 KMR 1250 B Karcher Lade

KMR 1250 B specifications

The Kärcher KMR 1250 B is an advanced ride-on compact sweeper designed to provide an efficient and effective cleaning solution for a variety of surfaces, both indoors and outdoors. Ideal for use in warehouses, manufacturing facilities, shopping malls, and large commercial spaces, the KMR 1250 B ensures quick and thorough cleaning with minimal downtime.

One of the standout features of the KMR 1250 B is its exceptional maneuverability. With a tight turning radius and compact dimensions, it can easily navigate through narrow aisles and crowded environments, making it suitable for diverse applications. This flexibility helps operators maintain optimal cleanliness throughout the entire facility without needing to move obstacles or rearrange items.

The KMR 1250 B incorporates advanced suction technology that delivers superior dust control. Its high-performance vacuum system minimizes airborne dust particles, ensuring a cleaner and healthier environment for both operators and bystanders. Equipped with a large, easily accessible dust container, the sweeper efficiently collects debris, allowing for extended operational periods between emptying.

Another key characteristic of the KMR 1250 B is its user-friendly design. The intuitive control panel enables operators to manage all functions with ease, while the ergonomic seat and controls ensure comfort during prolonged use. The sweeper also features an adjustable brush pressure system that allows for customization based on surface type and level of dirt, enhancing cleaning performance across a range of environments.

The KMR 1250 B stands out not only for its functionality but also for its durability. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The robust design contributes to reduced maintenance and longer service life, making it a cost-effective investment for businesses.

Further enhancing its appeal is the eco-friendly operation of the KMR 1250 B. It is designed to operate quietly, reducing noise pollution, and its efficient brushing system minimizes power consumption without compromising performance. This consideration for the environment aligns with modern sustainability practices and regulations.

In conclusion, the Kärcher KMR 1250 B is an efficient, maneuverable, and durable ride-on sweeper, packed with advanced features and technologies that cater to various cleaning needs. Its user-friendly design, effective dust control, and eco-friendly operation make it an essential tool for maintaining cleanliness in any large commercial space. Investing in the KMR 1250 B not only improves cleanliness but also enhances overall operational efficiency.
Top Page Image Contents