Karcher KMR 1250 B manual Prior to initial start-up, Pushing the sweeper by hand

Page 7

English

User Instructions

KMR 1250 B

Prior to initial start-up

Unloading procedure

Do not use a forklift truck for unloading as it could

!cause damage to the sweeper.

The sweeper has been lashed onto a pallet to ensure that it can be transported safely. The procedure for unpacking the sweeper is as follows:

1.Remove the wooden boards from the pallet and nail them onto the end of the pallet (in front of the sweeper).

2.Detach the wires holding the sweeper in place at the ends of the pallet.

3.Knock away the blocks used for locking the wheels and use them for the support of the wooden planks on the left and right.

4.Drive the sweeper off the pallet and down the ramp made from the boards.

5.The side brush has been tied to the chassis for trans- port. Undo the cord holding it in place.

Pushing the sweeper by hand

If you wish to move the sweeper without using its own drive:

nOpen the engine cover.

nFold the cover towards the rear; it will be held in place by

the pneumatic spring.

çTurn the lever for allowing freewheeling to position ”OFF”. n Release the handbrake.

n Push the sweeper to the required destination.

Note:

Do not move the sweeper over long distances without using its own drive or at higher speeds than 10 km/h (e.g. whilst being towed).

After moving the machine

nPut the parking brake on.

nSet free-wheeling lever to position ”ON”.

32

Page 6 Page 8
Image 7
Page 6 Page 8
Contents KMR 1250 B Ðúêîâîäñòâî çà ðàáîòà 128 Ñïèñúê íà ðåçåðâíè ÷àñòè 228 User Instructions ContentsExplosion hazard while refuelling For your safetyFire hazard while sweeper is operating On behalf of the environment Filter system Intended usage Sweeper functionsMain components Sweeping mechanismPushing the sweeper by hand Prior to initial start-upAfter moving the machine Operating controls Opening the fuel tap Adjusting the driver’s seatPreparing the sweeper for use Filling the fuel tank Explosion hazard while refuellingInitial driving trials Starting the sweeperMoving off and sweeping Manual cleaning Cleaning the filterStopping the sweeper and switching off Automatic cleaningImportant information Injury hazard Emptying the waste hopperRisk of sweeper toppling over Sweeping on dry ground Typical applicationsSweeping on damp or wet ground Picking up larger items sticks, tins, etc Shutting the sweeper down for longer periodsOvercoming obstacles Transporting the sweeper Cleaning and careFirst engine oil change MaintenanceDaily maintenance Maintenance intervalsTionally Maintenance tasks Opening/closing the unit coverDisconnecting the battery Safety information applicable to maintenance tasksOil Cleaning the fuel filter holder Cleaning or replacing the air cleanerChecking the hydraulic system Safety information Replacing the side brush Replacing the sealing skirtsAdjusting the sweeping pattern Only valid for main brush roller with fixed settingReplacing the main brush roller Replacing the dust filters Replacing fusesFault Possible cause Remedy Engine does not start TroubleshootingTechnical specifications IPX3 KMR 1250 B Karcher Lade

KMR 1250 B specifications

The Kärcher KMR 1250 B is an advanced ride-on compact sweeper designed to provide an efficient and effective cleaning solution for a variety of surfaces, both indoors and outdoors. Ideal for use in warehouses, manufacturing facilities, shopping malls, and large commercial spaces, the KMR 1250 B ensures quick and thorough cleaning with minimal downtime.

One of the standout features of the KMR 1250 B is its exceptional maneuverability. With a tight turning radius and compact dimensions, it can easily navigate through narrow aisles and crowded environments, making it suitable for diverse applications. This flexibility helps operators maintain optimal cleanliness throughout the entire facility without needing to move obstacles or rearrange items.

The KMR 1250 B incorporates advanced suction technology that delivers superior dust control. Its high-performance vacuum system minimizes airborne dust particles, ensuring a cleaner and healthier environment for both operators and bystanders. Equipped with a large, easily accessible dust container, the sweeper efficiently collects debris, allowing for extended operational periods between emptying.

Another key characteristic of the KMR 1250 B is its user-friendly design. The intuitive control panel enables operators to manage all functions with ease, while the ergonomic seat and controls ensure comfort during prolonged use. The sweeper also features an adjustable brush pressure system that allows for customization based on surface type and level of dirt, enhancing cleaning performance across a range of environments.

The KMR 1250 B stands out not only for its functionality but also for its durability. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The robust design contributes to reduced maintenance and longer service life, making it a cost-effective investment for businesses.

Further enhancing its appeal is the eco-friendly operation of the KMR 1250 B. It is designed to operate quietly, reducing noise pollution, and its efficient brushing system minimizes power consumption without compromising performance. This consideration for the environment aligns with modern sustainability practices and regulations.

In conclusion, the Kärcher KMR 1250 B is an efficient, maneuverable, and durable ride-on sweeper, packed with advanced features and technologies that cater to various cleaning needs. Its user-friendly design, effective dust control, and eco-friendly operation make it an essential tool for maintaining cleanliness in any large commercial space. Investing in the KMR 1250 B not only improves cleanliness but also enhances overall operational efficiency.
Top Page Image Contents