Karcher KMR 1250 B manual Preparing the sweeper for use, Adjusting the driver’s seat

Page 9

English

User Instructions

KMR 1250 B

Preparing the sweeper for use

All directions given (left/right, front/rear) are as seen from the driver’s seat.

nCheck the oil level in the engine (see Chapter: “Mainte- nance”).

nCheck the amount of fuel in the tank and fill up, if required (see below).

nCheck the level of hydraulic fluid and top up, if required (see Chapter: “Maintenance”).

nCheck the air pressure in the tyres (see Chapter: “Maintenance”).

nInspect the brush roller and remove any string, rope, etc., that may be caught up in the brushes.

nCheck the dust filter. If it is very dirty, operate the shaker to clean it off.

nEmpty the waste container.

Adjusting the driver’s seat

The driver’s seat can be adjusted to suit persons of various heights.

nUnhook the rods in the seat tilting device. ç Undo the 4 screws.

nMove the seat to the desired position.

nTighten the screws and hook the rods back into the tilting device.

Filling the fuel tank

!Explosion hazard while refuelling!

n Do not fill up with fuel

– in an enclosed space

– while the engine is running.

n Do not smoke while refuelling the vehicle. n Fuel expands as it becomes warmer.

Do not fill the tank right up to the top. Leave a gap of at least 1 cm under the bottom edge of the filler neck.

n Wipe up any fuel they may have been spilt and ensure that the cap is replaced firmly on the tank.

n Use petrol, regular (lead-free).

Opening the fuel tap

n Open the unit cover. ç Open the fuel tap.

OPEN = lever pushed to side opposite to direction of travel

n Close the unit cover.

34

Page 8 Page 10
Image 9
Page 8 Page 10
Contents KMR 1250 B Ðúêîâîäñòâî çà ðàáîòà 128 Ñïèñúê íà ðåçåðâíè ÷àñòè 228 User Instructions ContentsFor your safety Explosion hazard while refuellingFire hazard while sweeper is operating On behalf of the environment Main components Intended usage Sweeper functionsSweeping mechanism Filter systemPrior to initial start-up Pushing the sweeper by handAfter moving the machine Operating controls Preparing the sweeper for use Adjusting the driver’s seatFilling the fuel tank Explosion hazard while refuelling Opening the fuel tapStarting the sweeper Initial driving trialsMoving off and sweeping Stopping the sweeper and switching off Cleaning the filterAutomatic cleaning Manual cleaningEmptying the waste hopper Important information Injury hazardRisk of sweeper toppling over Typical applications Sweeping on dry groundSweeping on damp or wet ground Shutting the sweeper down for longer periods Picking up larger items sticks, tins, etcOvercoming obstacles Transporting the sweeper Cleaning and careDaily maintenance MaintenanceMaintenance intervals First engine oil changeDisconnecting the battery Maintenance tasks Opening/closing the unit coverSafety information applicable to maintenance tasks TionallyOil Cleaning or replacing the air cleaner Cleaning the fuel filter holderChecking the hydraulic system Safety information Replacing the side brush Replacing the sealing skirtsAdjusting the sweeping pattern Only valid for main brush roller with fixed settingReplacing the main brush roller Replacing the dust filters Replacing fusesFault Possible cause Remedy Engine does not start TroubleshootingTechnical specifications IPX3 KMR 1250 B Karcher Lade

KMR 1250 B specifications

The Kärcher KMR 1250 B is an advanced ride-on compact sweeper designed to provide an efficient and effective cleaning solution for a variety of surfaces, both indoors and outdoors. Ideal for use in warehouses, manufacturing facilities, shopping malls, and large commercial spaces, the KMR 1250 B ensures quick and thorough cleaning with minimal downtime.

One of the standout features of the KMR 1250 B is its exceptional maneuverability. With a tight turning radius and compact dimensions, it can easily navigate through narrow aisles and crowded environments, making it suitable for diverse applications. This flexibility helps operators maintain optimal cleanliness throughout the entire facility without needing to move obstacles or rearrange items.

The KMR 1250 B incorporates advanced suction technology that delivers superior dust control. Its high-performance vacuum system minimizes airborne dust particles, ensuring a cleaner and healthier environment for both operators and bystanders. Equipped with a large, easily accessible dust container, the sweeper efficiently collects debris, allowing for extended operational periods between emptying.

Another key characteristic of the KMR 1250 B is its user-friendly design. The intuitive control panel enables operators to manage all functions with ease, while the ergonomic seat and controls ensure comfort during prolonged use. The sweeper also features an adjustable brush pressure system that allows for customization based on surface type and level of dirt, enhancing cleaning performance across a range of environments.

The KMR 1250 B stands out not only for its functionality but also for its durability. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The robust design contributes to reduced maintenance and longer service life, making it a cost-effective investment for businesses.

Further enhancing its appeal is the eco-friendly operation of the KMR 1250 B. It is designed to operate quietly, reducing noise pollution, and its efficient brushing system minimizes power consumption without compromising performance. This consideration for the environment aligns with modern sustainability practices and regulations.

In conclusion, the Kärcher KMR 1250 B is an efficient, maneuverable, and durable ride-on sweeper, packed with advanced features and technologies that cater to various cleaning needs. Its user-friendly design, effective dust control, and eco-friendly operation make it an essential tool for maintaining cleanliness in any large commercial space. Investing in the KMR 1250 B not only improves cleanliness but also enhances overall operational efficiency.
Top Page Image Contents