Replacing the sealing skirts

English

User Instructions

KMR 1250 B

Direction of travel

The sealing skirts fulfil an important function. They retain the partial vacuum in the area round the brushes which is es- sential so that the sweeper can function properly. They ensure that sweeping can take place without clouds of dust being formed at the same time. If the sealing skirts are damaged or worn out, they must be replaced immediately.

nPark the sweeper and switch off the engine.

nRemove the retaining screws and detach the sealing skirts.

nFit new skirts, and align them as follows:

The side skirts should be adjusted so that they clear the ground by 1–3 mm.

The rear skirt should be adjusted so that they clear the ground by 1–5 mm.

nThe front skirt cannot be adjusted. Replace the skirt as soon as you see signs of excessive wear.

nTighten the retaining screws.

Replacing the side brush

nPark the sweeper and switch off the engine.

nRaise the side brush.

nRemove the three hex-socket bolts (5 mm Allen key).

n Detach the side brush.

n Push the new side brush onto the drive pin. n Refit and tighten the three hex-socket bolts.

Replace light unit

n Stop the machine and turn it off. n Take out the ignition key.

n Undo 6 screws S on the panel. n Remove the panel 1.

n Unscrew the Phillips screw between the supports of the lamp holder on the defective headlight.

n Turn the lens of the defective headlight anti-clockwise about 1/4 of a turn 2 and take out reflector housing 3.

n Replace light unit.

n Insert reflector housing with new light unit in panel again from below and secure with about 1/4 of a turn clockwi- se. Make certain it engages properly, the label HALOGEN on the headlight glass must be able to be read horizontally 4.

n Screw in again the screw between the supports, then secure the panel with the 6 screws.

KMR 1250 B specifications

The Kärcher KMR 1250 B is an advanced ride-on compact sweeper designed to provide an efficient and effective cleaning solution for a variety of surfaces, both indoors and outdoors. Ideal for use in warehouses, manufacturing facilities, shopping malls, and large commercial spaces, the KMR 1250 B ensures quick and thorough cleaning with minimal downtime.

One of the standout features of the KMR 1250 B is its exceptional maneuverability. With a tight turning radius and compact dimensions, it can easily navigate through narrow aisles and crowded environments, making it suitable for diverse applications. This flexibility helps operators maintain optimal cleanliness throughout the entire facility without needing to move obstacles or rearrange items.

The KMR 1250 B incorporates advanced suction technology that delivers superior dust control. Its high-performance vacuum system minimizes airborne dust particles, ensuring a cleaner and healthier environment for both operators and bystanders. Equipped with a large, easily accessible dust container, the sweeper efficiently collects debris, allowing for extended operational periods between emptying.

Another key characteristic of the KMR 1250 B is its user-friendly design. The intuitive control panel enables operators to manage all functions with ease, while the ergonomic seat and controls ensure comfort during prolonged use. The sweeper also features an adjustable brush pressure system that allows for customization based on surface type and level of dirt, enhancing cleaning performance across a range of environments.

The KMR 1250 B stands out not only for its functionality but also for its durability. Constructed with high-quality materials, it is designed to withstand the rigors of daily use in demanding environments. The robust design contributes to reduced maintenance and longer service life, making it a cost-effective investment for businesses.

Further enhancing its appeal is the eco-friendly operation of the KMR 1250 B. It is designed to operate quietly, reducing noise pollution, and its efficient brushing system minimizes power consumption without compromising performance. This consideration for the environment aligns with modern sustainability practices and regulations.

In conclusion, the Kärcher KMR 1250 B is an efficient, maneuverable, and durable ride-on sweeper, packed with advanced features and technologies that cater to various cleaning needs. Its user-friendly design, effective dust control, and eco-friendly operation make it an essential tool for maintaining cleanliness in any large commercial space. Investing in the KMR 1250 B not only improves cleanliness but also enhances overall operational efficiency.