Karcher KM 100 / 100 R P manual Testing and maintenance work, Commissioning Adjust driver seat

Operating instructions KM 100/100 R / KM 100/100 R P English

Before every operation

General notes

!Stand sweeper on a flat surface

!Turn off key switch (position "0")

Testing and maintenance work

!Check charge condition of battery *

!Check side brushes *

!Check main brush *

!Empty the swept material container

!Check tyre inflation pressure *

*See maintenance work chapter for instructions

Commissioning

Adjust driver seat

!Open unit cover, engage stay bar

!Slightly loosen wing nuts of seat runners

!Push the seat into the appropriate position

!Retighten wing nuts

Note:

There is a further adjustment possibility if the adjusting range is insufficient

!Unscrew the 4 screws at the seat contact switch plate

!Remove the plate

!Turn the seat forward

!Unscrew 4 screws of seat mounting

!Shift seat and refasten with screws

!Remount seat contact switch plate

Switching on the machine

!Sit on the driver seat

!Do NOT actuate the drive pedal!

Note:

The machine is equipped with a seat contact switch. The machine is switched off and the parking brake is automatically applied when the driver leaves his seat.

!The main brush and side brush switches are in their upper position

!Turn the key switch to position "I"

Run machine

Danger

Do not stand up when driving – danger of falling.

Prior to start of the machine

!The main brush and side brush switches are in their upper position

!Switching on the machine

Drive forwards

!Slowly press the driving pedal

22