Jonsered CS 2156 manual Stopping

Page 29

STARTING AND STOPPING

Pull the front hand guard towards the front handle. The chain brake is now disengaged. Your saw is ready for use.

Stopping

Stop the engine by switching off the ignition.

English – 29

Image 29

Contents EPA Key to symbols KEY to SymbolsContents EPA Personal protective equipment Safety InstructionsMachine′s safety equipment Chain brake and front hand guard Throttle lock Stop switchChain catcher Right hand guardChecking the front hand guard MufﬂerChecking brake band wear Checking the brake trigger Checking the inertia brake releaseThrottle lock Chain catcherCutting equipment Stop switchGeneral rules Vibration damping systemBar Cutting equipment designed to minimise kickbackChain Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting raker clearanceSharpening cutting teeth With a badly sharpened chainSetting the raker clearance General advice on setting raker clearanceTensioning the chain If the raker clearance is too largeChain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Do not let go of the handles How to avoid kickbackWhat is kickback? Starting General safety precautionsBasic safety rules Fuel safetyGeneral working instructions Transport and storageTerms Basic cutting techniqueGeneral Limbing CuttingSafe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreatFelling cut Freeing a tree that has fallen badly General adviceCutting the trunk into logs Freeing a trapped treeWhat is what on the chain saw? What is WHAT?Fitting the bar and chain AssemblyFollowing applies to chain saws with catalytic converters Fuel HandlingFuel Fuelling Chain oilStarting and stopping Starting and StoppingCold engine Warm engineStopping Carburettor MaintenanceStarter Correctly adjusted carburettorChanging a broken or worn starter cord Tensioning the recoil springSpark plug Air ﬁlterMufﬂer Fitting the starterCentrifugal cleaning Turbo Adjustment of the oil pumpWhen making adjustments Needle bearing lubricationTemperature -5C 23 F or colder Temperature 0 C 32 F or colderHeated handles CS 2156W, CS 2159W Electrical carburettor heating CS 2156WH, CS 2159WHBelow you will ﬁnd some general maintenance instructions Daily maintenance Weekly maintenanceMonthly maintenance Technical data Technical Data063/1,6 mm 22BP Bar Length Pitch, inch Max nose Chain Inches Radius050/1,3 mm 20BP Your Warranty Rights and Obligations Federal Emission Control Warranty Statement1088891-95