SECTION
SECTION 2—PARTS AND
INSTALLATION
Parts Information
For parts information, please contact ICCG Technical Service at (800) 668‐2337.
About Installation
WARNING
Access for servicing the tub MUST be provided. If necessary, install a service access panel in the wall with a minimum size of 16 x
CAUTION
The door MUST be closed and latched during installation to avoid deformation of the tub shell.
DO NOT lift the tub by the plumbing.
DO NOT remove or relocate the pump. Modifications to the pump location may cause the system to malfunction and will void the warranty.
NOTE: For this procedure, refer to FIGURE 2.1.
The tubs are designed to be built‐in against one, two or three walls, much the same way a traditional tub/shower unit is installed in an alcove. Optional end panels are available for corner or one wall installation and are only available at the time of tub order.
One Wall Installation - | Two Wall Installation - | Three Wall Installation - |
Wall Mount | Corner Mount | Recess Mount |
FIGURE 2.1 Tub and surrounding wall configurations
Recessed Side Entry Bath Tubs | 14 | Part No 1150695 |