CONNECTING AN IR EMITTER (OTHER BRAND PRODUCT)
When the ZR6001 and ZC4001 are connected via the PLC, the ZC4001 can control other brand product. Other brand product is controlled by remote control signals sent from an emitter connected to the IR EMITTER OUT terminals of the ZR6001 to the IR sensor of the source unit.
To control other brand’s output, an IR code must be set. If the IR code of the source is unknown, the IR code learning feature must be used.
OTHER BRAND VCR
OTHER BRAND DVD PLAYER
IR SENSOR
EMITTER
IR OUTPUT
|
| ANTENNA |
|
|
| COMPONENT VIDEO |
|
|
|
| MULTI FIXED OUT | IR EMITTER OUT |
|
|
| ||||||
|
|
|
|
|
|
|
|
| MONITOR OUT |
|
|
|
|
|
|
|
| ||||
|
|
|
|
| Y | CB/PB | CR/PR | Y | CB/PB | CR/PR | Y | CB/PB | CR/PR |
|
| L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 | 4 |
|
|
FM (75Ω) GND | AM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AC OUTLETS | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| R |
|
|
| ||
VIDEO |
|
|
|
|
|
| VCR1 | DSS/VCR2 | MONITOR |
|
|
|
|
|
| 120V 60Hz | |||||
TV | DVD | VCR1 | DSS/VCR2 | MONITOR |
|
|
|
|
|
|
|
|
|
|
| ||||||
| IN | OUT | IN | OUT | OUT |
| TV | DVD | IN | OUT | IN | OUT | OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MULTI |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| DIGITAL IN | DIGITAL OUT |
|
|
| RC |
|
| L | SL | SBL | C | MODEL NO. ZR6001 |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| IN |
|
|
|
|
|
|
|
|
|
|
| |
3 | 4 | COAX. |
|
|
|
|
|
|
|
|
|
|
|
| AC IN |
|
|
|
| SWITCHED | UNSWITCHED |
|
|
|
|
|
|
|
|
| FLASHER |
|
|
|
|
|
|
|
|
| 1A 120W MAX 1A 120W MAX | ||
|
|
|
|
|
|
|
|
|
| IN |
|
|
|
| PRE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OUT |
|
|
|
|
|
|
1 | 2 | OPT. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OUT |
| R | SR | SBR | SW |
|
|
|
|
|
|
|
TV | DVD | VCR1 | DSS/VCR2 | CD | TAPE | CDR/MD | MULTI | L | SL | SBL | C | R | L | R |
| L | R | L | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 7.1CH |
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
| IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FRONT | CENTER | SURROUND | SURROUND BACK | |||
| IN | OUT | IN | OUT |
| IN | OUT | IN | OUT | OUT | R | SR | SBR | SW | SPEAKER SYSTEMS : MINIMUM 6 OHMS | M. SPEAKER B | |||||
|
|
|
|
|
| AUDIO |
|
|
|
| (AUX2) |
|
|
|
|
|
|
|
|
|
|
1. Connect an emitter to an IR EMITTER OUT terminal on the ZR6001.
2. Position the IR output of the emitter near to the IR sensor of the other brand source.
Notes:
•Up to 4 emitters can be connected to the ZR6001.
•To control Marantz products from the ZC4001 over a PLC connection, connect the source as explained in “CONNECTING TO THE
SPEAKER PLACEMENT
The ideal surround speaker system for this unit is
For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
Your center channel speaker is very important as over 80% of the dialog from a typical motion picture emanates from the center channel.
It should possess similar sonic characteristics to the main speakers. Surround channel speakers need not be identical to the front channel speakers, but they should be of high quality.
The surround center speaker is useful for playback of Dolby Digital Surround EX or
Bass effects are an important part of home theater. For optimal enjoyment a subwoofer should be used as it is optimized for low frequency reproduction. If you have full range front speakers, however, they may be used in place of a subwoofer with proper setting of the switches in the menu system.
| Surround Left | Subwoofer | |
|
| ||
Surround Back |
| Front Left | |
|
| ||
Left |
|
| |
|
| Front Center | |
Surround Back |
| 0° | |
|
| ||
Right |
| 22° | |
150° |
| 30° | |
|
| ||
135° | Surround Right | Front Right | |
110° | |||
90° |
|
Front left and right speakers
We recommend to set the front L and R speakers with
Center speaker
Align the front line of the center speaker with the front L/R speakers. Or place the center speaker a little backward from the line.
Surround left and right speakers | ENGLISH |
The center of the speaker should face into the | |
When the ZR6001 is used in surround operation, |
|
the preferred location for surround speakers is on |
|
the side walls of the room, at or slightly behind the |
|
listening position. |
|
room. |
|
|
Surround back left and right speakers
Surround back speakers are required when a full
Speakers should be placed on a rear wall, behind the listening position.
The center of the speaker should face into the room.
Subwoofer
We recommend using a
HEIGHT OF THE SPEAKER UNITS
Front left and right speakers, and a center speaker
Align the tweeters and
Surround left and right speakers, and surround back speaker
Place the surround left, right and surround back speakers higher than your ears by about 2 Ft. – 3 Ft. (70 cm – 1 m). Also place the speakers at the same height, as best as possible.
2 Ft. – 3 Ft. |
70cm |
(70 1mcm – 1 m) |
Note:
•Use
13