Multi Room System, Multi Room Playback Using

ENGLISH

MULTI ROOM

SYSTEM

The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the ZR6001 is located.

To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary.

The operations possible with the multi room function are explained briefly below.

MULTI ROOM PLAYBACK USING

THE MULTI ROOM OUT TERMINALS

The ZR6001 is equipped with audio pre-out terminals for which the volume is adjustable as the MULTI output terminals.

A separately sold stereo power amplifier can be connected to enjoy multi room playback.

The MULTI OUT system can not be operated with the supplied remote controller.

MULTI ROOM PLAYBACK USING

THE MULTI SPEAKER TERMINALS

The ZR6001 allows you to connect another set of speakers and place them in a different room or separated area for listening to music.

The MULTI ROOM SPEAKER system can not be operated with the supplied remote controller.

MULTI PLC SYSTEM

With the ZR6001, the source selected for the Multi PLC and MULTI ROOM features are one and the same.

Accordingly, the source selected for the “MULTI ROOM” setting also becomes the source for the Multi PLC feature.

For PLC settings, see pages 24 – 25.

For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.

When the outputs of the MULTI OUT terminals are wired and connected to amplifiers installed in other rooms or M (MULTI) SPEAKER B terminals are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed.

ZR6001 has some feature to MULTI ROOM SYSTEM as source selector, sleep timer, Multi Room Speaker output and remote control.

SURROUND	PURE	SIMPLE
MODE	DIRECT	SETUP	DISPLAY	MEMORY	CLEAR
			ENTER
AUTO	HT-EQ	MENU	EXIT	BAND	T-MODE

1. Press the MULTI button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

2. In this time, you can select the input source by turning the input selector knob.

Then, the display indicates “MULTI VOLUME” “MULTI VOL. xx” for approx. 5 seconds.

3. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the second room.

SURROUND	PURE	SIMPLE
MODE	DIRECT	SETUP	DISPLAY	MEMORY	CLEAR
			ENTER
AUTO	HT-EQ	MENU	EXIT	BAND	T-MODE

1. Press the M. SPEAKER B button. The unit enters multi room speaker mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicators for approx. 10 seconds.

2. In this time, you can select the input source by turning the input selector knob.

3. Then, the display indicates “MSPKR VOLUME” “MSPKR VOL.–18” for approx. 5 seconds. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the multi room.

Notes for MULTI ROOM SPEAKER

•MULTI ROOM SPEAKER On/ Off is available in main room only.

•MULTI ROOM SPEAKER output terminals can b e u s e d w h e n t h e S U R R O U N D B A C K SPEAKER is set NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 21)

•“The Surr. Back Speakers are in use” is displayed by pressing the MULTI SPEAKER button when the SURROUND BACK SPEAKER is set except NONE in SPEAKER SETUP menu . (See SPEAKER SETUP, page 21)

•Multi room operations cannot be performed from the remote controller.