Homelite CSP4518, CSP3816 manual Specifications

Page 9

 

 

SPECIFICATIONS

 

 

 

 

 

 

 

 

Weight - No bar, chain, fuel or oil

4.4 kg (9.7 lbs.)

Fuel tank capacity

575 cm3 (19.4 oz.)

Oil tank capacity

350 cm3 (11.8 oz.)

Bar lengths

40-50 cm (16-20 in.)

Chain pitch

8.26 mm (0.325 in.)

Chain gauge

1.27 mm (0.050 in.)

Chain type

Semi-Chisel, LoPro

Drive sprocket

7 - tooth

Engine displacement

................... ............................................................ 45 cm3 (2.75 cu.in.)

Maximum engine power ISO 7293)

...................................................................................... 1.9 kW (2.5 HP)

Maximum engine speed with attachment

12,500 min-1

Idle engine speed

2,600 - 3,400 min-1

UK - Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesKeep ALL Parts of Your Body away from the saw General Precautions Specific Safety RulesSafety Apparel Basic Precautions in the CUTTING/ Work AreaPush and Pull Maintenance PrecautionsKICK-BACK Pull PushSymbol Name Explanation SymbolsSymbols Specifications Features Operation Understanding Your Chainsaw Safety DevicesSAFE-T-TIPANTI-KICK-BACK Nose Guard LOW KICK-BACK SAW ChainChain Brake KICK-BACK PrecautionsRUN Position Brake KICK-BACK Danger Zone RotationalHandling the Fuel Safely Fuel and RefuellingMixing the Fuel Filling the TankBrake Position Ignition Switch RUN Primer Bulb Adding OILStarting the Engine Starting a Cold Engine Ignition Switch Stop Position Stopping the EngineStarting a Warm Engine Proper Grip on Handles Preparing for CuttingProper Cutting Stance Chain LineWork Area Precautions Basic OPERATING/CUTTING ProceduresAdjusting the Carburettor AIR FilterAdjusting Idling Speed Operating the Chain BrakeBrake Position RUN Position Felling Trees Hazardous Conditions Keep Bystanders AwayRetreat Path Proper Procedure for Tree Felling Planned Line of FallRetreat Notch Approx /3 Diameter Trunk Back CUT HingeHinge Back CUT WedgeBucking Removing Buttress RootsBucking with a Wedge Vertical CUT Loose Section Horizontal KICK-BACK WedgeOVER-BUCKING Bucking Logs Under StressUNDER-BUCKING LOG Supported AT ONE END Finishing CUTCutting Spring Poles Limbing and PruningLoad Second CUT Finishing CUT Spring PoleAssembling the BAR and Chain MaintenanceCutters Chain Tensioning Screw Adjusting the Chain Tension Chain MaintenanceFlats on Drive Links Sharpening the Cutters Check for Wear or Damage LEFT-HAND Cutters RIGHT-HAND TOP Plate Filing Angle Maintaining Depth Gauge ClearanceSide Plate Angle Correct Less thanMaintaining the Guide BAR Restore Original Shape by Rounding FrontMaintaining the SAFE-T-TIPNOSE Guard Lubricating HoleCleaning the AIR Filter Mounting the SAFE-T-TIP Nose GuardTighten 3/4 A Turn Cleaning the Engine Cleaning the Starter UnitChecking the Fuel Filter Replacing the Sparking PlugChain Catcher Brake Band Clean the Chain Brake Cleaning the Spark Arresting SilencerChain Brake Storing the Chainsaw 1 Month or LongerBAR and Chain Combinations TroubleshootingTroubleshooting Guarantee Statement Rtsa / Rtuk / RTG WarrantyRyobi Technologies GmbH
Top Page Image Contents