Marantz SR9200 manual Loading Batteries

REMOTE CONTROL UNIT RC3200A

Jˆ button

Press this button turns on the backlight to LCD display.

This chapter describes the functions which control the SR9200. Please look at the user guide of the RC3200A for operation instructions.

K Serial port

ENGLISH

12

11

ˆ 10

9

				1
8
7	VOL	OK	CH	2
6	H		S	3
		Ex	M
5				4

ASelect buttons to Navigation bar

These buttons work with navigation bar in LCD.

Each function may also be provided with an alphanumeric function indicator visible in navigation bar of LCD display.

B CH (Channel) UP and DOWN buttons

Use these buttons to select the preset number of tuner in the SR9200 or channel of TV.

CS (Status) button

Press this button to see (jump to) the status of SR9200 on LCD panel.

DM (Menu) button

Use this button to entry the OSD menu system.

EEx (Exit ) button

Press this button to exit on screen menu .

FH (mute) button

Press this button to mute the sound temporarily.

GVOL(Volume) UP and DOWN buttons

Use these buttons to raise and lower the SR9200’s volume level.

HOK and cursor (Up / Down / Left / Right )

buttons

Use these buttons to navigate through on-screen menus. (Refer to ”ON-SCREEN MENU SYSTEM” on page 27 - 32)

IPage scroll Up /Down buttons

Use these buttons to scroll up or down the device of LCD screen.

To connect the RC3200A with your computer by attached serial cable for future upgrades.

LLCD touch scren

The LCD touch screen is divided into different sections:

Here the date and time are displayed when you are operating your devices.

In this area you can see:

·the page number;

·the device you are operating;

·the battery level indicator.

With these soft buttons you operate your device.

Navigation bar:

These are the labels of the 4 hard buttons below the touch screen.

LOADING BATTERIES

When you use RC3200A for the first time, you have to install the batteries.

The RC3200A requires 3 AA-batteries (3 x 1,5 V) to function.

Note

•Attached batteries are to check basic function of remote commander, you can use either primary or rechargeable batteries.

1.Remove the back cover.

2. Insert the new batteries (AA type) with correct (+) and (–) polarity.

3. Close until it clicks.

11