Marantz SR9200 Multi Room System, Multi Room Playback Using Multi Room OUT Terminals, Second Room

MULTI ROOM SYSTEM

The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR9200 is located.

To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below.

For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.

When the outputs of the MULTI ROOM OUT terminals are wired and connected to amplifiers installed in other rooms or MULTI SPEAKER OUT terminals are wired and connected to L&R speakers in other room, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed.

SR9200 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer, Multi Room Speaker output and remote control.

MULTI ROOM PLAYBACK USING THE

MULTI ROOM OUT TERMINALS

The SR9200 is equipped with audio pre-out terminals for which the volume is adjustable and composite video output terminals as the MULTI ROOM output terminals.

A separately sold stereo power amplifier (PM8100) can be connected to enjoy multi room playback.

Operation to MULTI ROOM OUT without the remote controller.

1. 4. 3.

1. Press the MULTI button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

2. In this time, you can select the input source by pressing the input selector buttons.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for approx. 5 seconds.

3. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the second room.

4. If you desire to set sleep timer to multi room, press SLEEP button to setup the time.

MULTI ROOM PLAYBACK USING THE

MULTI SPEAKER TERMINALS

The SR9200 allows you to connect another set of speakers and place them in a different room or separated area for listening to music. Operation to MULTI ROOM SPEAKER without the remote controller.

1. 4. 2. 3.

1. Press the MSPK button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” & “M-SPKR” indicators for approx. 10 seconds.

2.	In this time, you can select the input source by pressing the input	ENGLISH
3.	selector buttons.
	Then, the display indicates “MULTI VOL” “VOLUME xx dB” for
	approx. 5 seconds.
	During this time, you can set the volume level in the multi room as
	desired.
4.	This will only set the volume in the multi room.
	If you desire to set sleep timer to multi room, press SLEEP button

to setup the time.

Notes for MULTI ROOM SPEAKER

•MULTI ROOM SPEAKER On/ Off is available in main room only.

•You can not play the source in 7.1ch playback mode as THX- Surr EX, DTS-ES in the main zone, when MULTI ROOM SPEAKER is active.In other words, the condition of main room is same as "Surr Back Speaker = None" setting.

•You can not turn MULTI SPEAKER on, when you set Speaker setup in OSD menu.

OPERATION TO MULTI ROOM OUTPUTS WITH THE REMOTE CONTROLLER FROM

SECOND ROOM.

1.

1. Tap the MULTI ROOM on on multi room remote control unit from the MULTI ROOM.

This operations will put the SR9200 into multi room mode and “MULTI” will light in the display.

MULTI ROOM Video output will show OSD information to condition of MULTI ROOM setup.

MU L T I ROOM

MU L T I ROOM	:	O F F
MU L T I S P KR	: O F F
V I D EO	:	D V D
A UD I O	:	D V D
V O L UME S E T U P	:	V AR I AB L E
V O L UME L E V E L	:	- 9 0 d B
S L E E P T I ME R	: O F F
- - - - MA I N - ROOM		S T A T U S - - - -
V I D EO : D V D	AUD I O : D V D
MA I N		E X I T

2. Press the VOL + or VOL – button on the multi room remote control unit to set the desired sound volume.

3. In multi room mode, the multi room remote control unit can be used in the multiroom to operate the following functions.

General:

Controlling volume level, sleep timer, and muting. Selecting input audio and video source

Tuner:

Selecting band, controlling preset channel up and down, tuning up and down, direct frequency call.

Notes for multi room system:

•The MULTI ROOM OUT and MULTI SPEAKER terminals are analog outputs.

These are not support to digital signals input.

If no sound is heard from the selected input source, check if the component is connected to the analog inputs.

•If Tuner (FM or AM) is active in main room, you can not control any function of tuner.

In this case, You can listen the same condition as main room.

45