Marantz SR9200 manual Component Video INPUT/OUTPUT, ⁄1AC Inlet, ⁄2AC Outlets, ⁄57.1 Channel Input

Page 14

ENGLISH

,COMPONENT VIDEO INPUT/OUTPUT

If your DVD player or other device has component video connectors, be sure to connect them to these component video connectors on the SR9200. The SR9200 has four component video input connectors to obtain the color information (Y, CB, CR) directly from the recorded DVD signal or other video component and one component video output connector to output it directly into the matrix decoder of the display device.

By sending the pure DVD component video signal directly, the DVD signal forgoes the extra processing that normally would degrade the image. The result is vastly increased image quality, with incredibly lifelike colors and crisp detail.

Notes:

• This component video output is available to OSD menu system.

.Speaker outputs terminals (for Main

room)

Seven terminals are provided for the front left, front right, front center, surround left, surround right, surround back left, and surround back right speakers.

⁄0Speaker outputs terminals (for Multi room)

Two terminals are provided for the left and right speakers for Multiroom(2nd zone)

Notes:

•Connect the these jacks to the matching + or – terminals on your speakers. When making speaker connections, always make certain to maintain correct polarity by connecting the red (+) terminals on the SR9200 to the red terminals on the speaker and the black (–) terminals on the SR9200 to the black terminals on the speakers.

⁄1AC INLET

Plug the supplied power cord into this AC INLET and then into the power outlet on the wall.

⁄2AC OUTLETS

Connect the AC power cables of components such as a DVD and CD player to these outlets. SWITCHED and UNSWITCHED outlets are provided.

The one marked SWITCHED provides power only when the SR9200 is turned on and is useful for components which you use every time you play your system.

The one marked UNSWITCHED is always live as long as the SR9200 is plugged into a live outlet.

A component connected here may be left on permanently, or may be switched off with its own power switch.

Caution:

•In order to avoid potential turn-off thumps, anything plugged in here should be powered up before the SR9200 is turned on.

⁄3VIDEO IN/OUT (TV, DVD, DSS, LD,

VCR1, VCR2)

These are the video inputs and outputs. There are 6 video inputs and 2 video outputs and each one includes both composite video and S- video configurations. Connect VCRs, LD players, DVD players, and other video components to the video inputs.

S-video sources can be viewed through the S-video outputs, and composite sources can only be viewed through the composite output. The 2 video output channels can be used to be connected to video tape recorders for making recordings.

⁄4AUDIO IN/OUT (CD, TAPE, CD-R, TV,

DVD, DSS, LD, VCR1, VCR2)

These are the analog audio inputs and outputs. There are 9 audio inputs (6 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players,DVD players and etc.... The audio inputs and outputs require RCA-type connectors.

⁄57.1 CHANNEL INPUT

By connecting a DVD Audio player, SACD player, or other component that has a multi channel port, you can playback the audio with 5.1 channel or 7.1 channel output.

⁄6RS232C

The RS232C port is to be used in conjunction with an external controller to control the operation of the SR9200 by using an external device.

The RS232C port may also be used in the future to update the operating software of the SR9200 so that it will be able to support new digital audio formats and the like as they are introduced.

⁄7REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with remote control (RC- 5) terminals.

⁄8MULTI ROOM REMOTE IN/OUT terminals

IN: Connect to multi-room remote control device, available from your Marantz dealer.

OUT: Connect to the Marantz component equipped with remote control (RC-5) terminals in another room (Second zone).

⁄9DC TRIGGER output terminals

Connect a device that needs to be triggered by DC under certain conditions (screen, power strip, etc…)

Use the system OSD setup menu to determine the conditions by which these jacks will be active.

Note:

•This output voltage is for (status) control only, It is not sufficient for drive capability.

¤0External IR transmitter terminal

If the SR9200 is located inside a rack or cabinet that will not allow infrared beams to transmit to 2way remote commander, you will need to connect a IR transmitter to this output to be able to use the 2way remote controller.

Then install the remote transmitter in an unblocked location where you can easily receive IR signal.

Note:

• An optional remote transmitter kit is required.

10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model SR9200 User Guide Risk of Electric Shock Important Safety Instructions Read Before Operating EquipmentPage Table of Contents AUDIO/VIDEO Features FeaturesAmplifier Features Flexbility FeaturesDescription English Front Panel 5INPUT Function Selector buttons AUDIO/ Video @5PHONES jack for stereo headphones4MUTE button 6AUX1 input jacksCINEMA, Music FL DisplayMUSIC, PRO Logic ¡4DTS-ES mode indicators DISC6.1 MTX6.1 ¡2AUTO.SURR Auto Surround mode indicator¡3THX Surr EX THX Surround EX mode indicator ¡5PEAK indicatorRear Panel SBR, C⁄2AC Outlets Component Video INPUT/OUTPUT⁄1AC Inlet ⁄3VIDEO IN/OUT TV, DVD, DSS, LD VCR1, VCR2Loading Batteries REMOTE-CONTROLLABLE Range Activating the RC3200AOperating Devices Main Tone AdjustOperating AMP & Tuner Input SelectTuner Surround ModeMulti Room Tuner page 3/3 Show the Status of SR9200 on LCD of RC3200ATuner page 2/3 Adjust the Backlight Timeout Adjusting the SettingsFirst Setup Change the Beep volumeTo Exit Setup Mode Second SetupThird Setup Learn Sequence Learning CommandsRecording Macros English RC3200A Edit Minimum System RequirementsImportant Notices Cleaning RC3200AHOW to Reset the RC3200A Connecting the Video Components ConnectingConnecting the Audio Components Connecting the Video Components with S-VIDEO / Component Connecting the Monitor and Video CameraConnecting the Digital / 7.1CH Input Connecting the SpeakersConnecting the Speakers with External Amplifier Connecting the Antenna and Power CordConnecting the Remote Control BUS RC-5 Connecting for the Multi RoomSetup On Screen Display Menu SystemSpeaker Setup Speaker SizeSpeaker Distance Time Alignment Speakers LevelPreference Bass Peak LevelEffect Level SurroundPL2 PRO Logic II Music Parameter DC Trigger Setup CH Input LevelAdjusting the Tonebass & Treble Control Adjusting the Main VolumeSelecting the Surround Mode Basic Operation Play BackDialogue Normalization Message Using the Sleep TimerNight Mode Surround Mode Virtual Circle SurroundMulti CH. Stereo CS-Cinema, CS-MusicAuto Movie Other Function Listening to Recording AN Analog SourceRecording a Digital Source CH Input AUX2 InputListening to the Tuner Preset MemoryBasic Operation Tuner Checking the Preset Stations Manual Preset MemoryRecalling a Preset Station Preset ScanSorting Preset Stations Name Input of the Preset StationMulti Room System Multi Room Playback Using Multi Room OUT TerminalsMulti Room Playback Using Multi Speaker Terminals Second RoomTroubleshooting Are the power amplifiers and speaker working properly ?HOW to Reset the Unit Technical Specifications FM Tuner SectionIs a registered trademark

SR9200 specifications

The Marantz SR9200 is a high-end A/V receiver that stands out in the competitive world of home audio and video equipment. Renowned for its exceptional sound quality, advanced features, and flexibility, it serves as a cornerstone for home theater enthusiasts seeking immersive audio experiences.

One of the main features of the SR9200 is its robust power amplification. The receiver boasts a substantial output, delivering 110 watts per channel across all seven channels, which ensures a rich and dynamic sound performance. This power allows it to drive a variety of speaker configurations, accommodating both small and large setups. The receiver employs a high-current amplifier design that significantly enhances transient response, allowing for crisp and clear audio delivery across all frequencies.

In terms of connectivity, the Marantz SR9200 offers an extensive array of options. It includes multiple HDMI inputs and outputs, supporting 4K passthrough and various audio formats such as Dolby Atmos and DTS:X. This makes it compatible with the latest high-definition video sources and ensures a future-proof setup for streaming and gaming. The HDMI inputs also support HDCP 2.2, enabling compatibility with UHD content.

Another key aspect of the SR9200 is its advanced audio processing capabilities. Utilizing Marantz's proprietary technologies, the receiver is equipped with Audyssey MultEQ XT for automatic room calibration. This feature analyzes the room acoustics and adjusts the audio output for optimal sound quality tailored to the specific environment. Furthermore, the receiver supports various surround formats, creating an enveloping soundstage that enhances movie watching and music listening.

The Marantz SR9200 also features a user-friendly interface, including a graphical user interface (GUI) that simplifies navigation through settings and inputs. The receiver can be controlled via the Marantz app, providing convenience for tech-savvy users.

In summary, the Marantz SR9200 is designed for audiophiles who demand top-tier performance and versatility in their home theater systems. With its powerful amplification, advanced audio technologies, and extensive connectivity options, it delivers an unparalleled audio experience that enriches all forms of entertainment. Whether for movies, music, or gaming, the SR9200 sets a high standard in high-fidelity home audio solutions.
Top Page Image Contents