Homelite UT10510 TOP Plate Filing Angle, Side Plate Angle, Maintaining Depth Gauge Clearance

Page 28

MAINTENANCE

TOP PLATE FILING ANGLE

See Figure 55.

■CORRECT 30° - file holders are marked with guide marks to align file properly to produce correct top plate angle.

■LESS THAN 30° – for cross cutting.

■MORE THAN 30° – feathered edge dulls quickly.

SIDE PLATE ANGLE

See Figure 56.

■CORRECT 80o – Produced automatically if you use the correct diameter file in the file holder.

■HOOK – “Grabs” and dulls quickly, increases the potential of KICKBACK.

Results from using a file with a diameter too small or a file held too low.

■BACKWARD SLOPE – Needs too much feed pressure, causes excessive wear to the bar and chain.

Results from using a file with a diameter too large or file held too high.

TOP PLATE FILING ANGLE 30°

CORRECT

LESS THAN 30°

MORE THAN 30°

INCORRECT

Fig. 55

 

 

SIDE PLATE FILING ANGLE

80°

CORRECT

HOOK

BACKWARD SLOPE

INCORRECT

Fig. 56

MAINTAINING DEPTH GAUGE CLEARANCE

See Figures 57, 58, and 59.

■Maintain the depth gauge at a clearance of .025 in. (0.6 mm). Use a depth gauge tool for checking the depth gauge clearances.

■Every time the chain is filed, check the depth gauge clearance.

■Use a flat file and a depth gauge jointer to lower all gauges uniformly. Use a .025 in. (0.6mm) depth gauge jointer. After lowering each depth gauge, restore original shape by rounding the front. Be careful not to damage adjoining drive links with the edge of the file.

■Depth gauges must be adjusted with the flat file in the same direction the adjoining cutter was filed with the round file. Use care not to contact cutter face with flat file when adjusting depth gauges.

DEPTH GAUGE

.025 in.

(0.6 mm)

Fig. 57

DEPTH GAUGE JOINTER

FLAT FILE

Fig. 58

RESTORE ORIGINAL

SHAPE BY ROUNDING

THE FRONT

Fig. 59

Page 28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules General PrecautionsSafety Apparel Basic Precautions in the CUTTING/ Work AreaMaintenance Precautions KickbackPush and Pull See FigureSymbols Symbol Name ExplanationSpecifications Features Understanding Your Chain SAW Safety Devices OperationSAFE-T-TIP ANTI-KICKBACK Nose Guard LOW Kickback SAW ChainKickback Precautions Fuel and RefuelingHandling the Fuel Safely Mixing the FuelStarting the Engine Adding OILSee Figures 8 through Starting the Engine Stopping the Engine Preparing for Cutting Proper Grip on HandlesProper Cutting Stance See Figures 16Adjusting the Carburetor Basic OPERATING/CUTTING ProceduresWork Area Precautions See Figures 20Felling Trees Adjusting Idle SpeedHazardous Conditions Proper Procedure for Tree Felling See Figures 23 throughHinge Bucking Removing Buttress RootsBucking with a Wedge Overbucking Bucking Logs Under StressUnderbucking Limbing and Pruning Cutting SpringpolesAssembling the BAR and Chain MaintenanceSee Figures 36 through Chain Tensioning PIN Hole Chain Tensioning Screw Adjusting the Chain Tension Chain MaintenanceSee Figures 45, 46, See Figures 48Sharpening the Cutters See Figures 50 throughLeft Hand Cutters Right Hand TOP Plate Filing Angle Side Plate AngleMaintaining Depth Gauge Clearance See Figures 57, 58,Maintaining the SAFE-T-TIP Nose Guard Maintaining the Guide BARSee Figures 61 Mounting the SAFE-T-TIP Nose Guard Cleaning the AIR FilterSee Figures 63, 64, Cleaning the Starter Unit Cleaning the EngineChecking the Fuel Filter Replacing the Spark PlugChain Catcher Cleaning the Spark Arresting MufflerStoring the Chain SAW 1 Month or Longer Troubleshooting BAR and Chain CombinationsTroubleshooting Warranty Limited Warranty StatementHomelite Consumer PRODUCTS, INC

UT10510 specifications

The Homelite UT10510 chainsaw is a versatile and efficient tool designed for both novice and experienced users who require a dependable saw for various tasks, from trimming and pruning to heavier cutting jobs. Known for its power and ease of use, the UT10510 is a reliable addition to any toolbox.

One of the main features of the Homelite UT10510 is its 10-inch cutting bar, which provides a perfect balance between maneuverability and cutting capacity. This size makes it ideal for tackling small to medium-sized branches, allowing users to handle tasks quickly and efficiently. It is also lightweight, reducing user fatigue during extended use, a benefit that is particularly important for those who may need to work for prolonged periods.

The UT10510 is powered by a gas engine, providing a robust 25cc of power. This engine allows for strong performance, enabling the saw to cut through tougher materials with relative ease. Additionally, the gas-powered design offers the advantage of being more portable than electric models, as it does not require a power source or long extension cords.

Another noteworthy technology incorporated into the Homelite UT10510 is its automatic chain lubrication system. This feature ensures that the chain remains well-lubricated during operation, which not only prolongs the life of the chain but also enhances cutting efficiency. A well-lubricated chain reduces friction, allowing for smoother cuts and reducing the risk of overheating.

Additionally, the UT10510 includes a tool-free chain tensioning system, which makes it easy for users to quickly adjust the chain tension without the need for additional tools. This feature is particularly useful for those who may not have extensive experience with chainsaw maintenance, as it simplifies what can be an otherwise complicated process.

Safety is also a significant consideration in the design of the Homelite UT10510. It features a chain brake that stops the chain immediately in case of kickback. This safety feature is critical for reducing the risk of accidents while operating the saw.

In summary, the Homelite UT10510 is a compact, powerful chainsaw designed for versatility and ease of use. With its effective 10-inch cutting bar, reliable gas engine, automatic chain lubrication, tool-free chain tensioning, and built-in safety features, it stands out as a practical choice for both casual users and those looking to handle more demanding cutting tasks. Whether you need to trim branches in your yard or cut firewood, the UT10510 is designed to meet your needs efficiently.
Top Page Image Contents