Krell Industries S-1000 manual Speaker Distance, Speaker in your system

Page 31

System Configuration, continued

Step 1, Listening Room Setup

Speaker Distance

The second option on the speaker main menu screen, SPEAKER DIS-

 

TANCE, allows you to tell the S–1000 the exact location of each loud-

 

speaker in your system.

 

Select SPEAKER DISTANCE on the SPEAKER MAIN MENU. The ROOM SETUP

 

screen appears:

Room Setup Screen

 

Prev

Note

HOW TO NAVIGATE

IN THE MENU MODE

1Press the menu key (29) to enter and exit the menu mode from the operational mode.

2Press the direction keys (33) to scroll from line to line, and to scroll through options within a line.

3Press the enter key (32) to select and

set an option.

4Use the directional keys to scroll to the next line.

5Press the prev key (30) to return to the previous screen.

6Press the pre key (1) to exit the menu mode and place the S–1000 in the stand-by mode.

When you access the ROOM SETUP screen, the cursor is blinking at the LEFT loudspeaker. Use the direction and enter keys to navigate the screen, select loudspeakers, and enter the correct distance (0 to 30 feet) from the main listen position to the loudspeaker.

After all the distances are set, press the previous key (30) once to return to the speaker main menu.

Any speaker not configured in the SPEAKER SETUP menu displays N/A (not

available) on the ROOM SETUP screen.

Krell S–1000

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents
Surround Information ContactContents Illustrations TablesIntroduction Operation Definition of TermsInput and Output ConnectionsHdmi Technology VideoUnpacking AC Power Guidelines PlacementGetting Started Front Panel Functions Front Panel and Remote Control DescriptionTuner Button/Key Mode 1 Button/LED/M1 Key Mode 2 Button/LED/M2 KeyDecoding Modes TV Button/Key CD Button/KeyIndividualized Pro Logic II Button/LED/PL KeyPreamp Button/LED/Key Display Window Front Panel DisplayBalance Button/LED/Bal Key Volume Knob/Directional KeysSurr/Back Button/LED/Rear Key Sub Button/LED/KeyMenu Key Remote Control Only DescriptionBattery Installation and Removal Amp Key Power Amp KeyDirectional Keys Prev KeyMute Key Enter KeyProcessor Back Panel FunctionsOther available modes. See Decoding Modes, on Back Panel Description Video Inputs Video Inputs Outputs Coaxial Digital Audio InputsDigital Audio Outputs Video Outputs55 RC-5 Power Connections Comm Port RS-232 ConnectorBack Panel Power Switch IEC ConnectorFirst Connect Analog Digital Sources Connecting the S-1000 to Your SystemVideo, and composite. There is no OSD available from Next Connect Video SourcesConnect Amplifiers LastConfiguration Overview System Configuration and NavigationSteps Pre Key Navigation Conventions Direction or Level KeysAccessing Menu System ConfigurationMain Menu Listening Room SetupConfigure Speakers StepDigital 5.1 or DTS 5.1 encoded software Sends 20Hz to 20KHz signals to the loudspeakerSpeakers simultaneously Second option on the speaker main menu screen, Speaker DIS Speaker DistanceSpeaker in your system Auto Noise Sequence Calibrate VolumeProgram Material Manual Noise SequenceOption S-1000 is shipped with pre-selected connections for each System matches the factory defaultsDigital inputs. See , on Assign Video Input Configure DevicesChoose a standard video format Inputs Assign Analog AudioAudio Inputs screen appears Migration to be active Ly useful for Sacd playersAssign Digital Audio Delay screen appears Lip synchronization screen allows you to add an adjustableDelay Projector, when the image is delayed by video processingEQ Memory screen appears Assign EQ MemoryConfigure Trigger Configuring Additional Inputs URE Levels screen appears Input device is selected it has a range of +/- 15 dB Device TrimConfiguring Analog Input Trim Analog Input Trim Mode SUB Trim screen appears Music Mode Sub TrimFrom the left and right channels focused sound field DTS ControlControl screen appears Plii Control Center. The default setting is 3 neutralMutes the center channel Screen Appears, with the cursor blinking at OSD Operation EqualizerOSD Operation Audio Operation Information remains on the screenOn-screen display appears Return to the Operation menuUse the dynamic range screen to adjust the dynamic range Dolby mode hold sets the time your S-1000 remains in DolbyDTS mode hold sets the time your S-1000 remains in DTS mode Or satellite receiver. The adjustment range is 0 no holdInput Setup Screen Input SetupProgram Remote System Information For video game software There are four Room EQ setup memories, each of which savesTreble to comprehensive room correction. The Digital Room Are filter type, frequency, shape, and levelRecalling Customized Settings and Restoring the Factory Room EQ Setup Audible if you have a source device playing Remote. The S-1000 is now in the operational modeSaving Customized SettingsFactory Default System SettingsON/OFF/STAND-BY Tape Input Output Operating the S-1000Simulcast Automatically Appendix Decoding Modes for the S-1000Detected Modes Dolby Pro Logic II Modes DTS Neo6 Modes Matrix mode is useful for monaural recordingsModes When listening to music. The table below lists the modesLoudspeakers that operate within each mode Krell Music SurroundWarranty Warranty Serial Number Return Authorization ProcedureAccessing the Service Request Form Service@krellonline.comDistortion THD Inputs SpecificationsSpecifications PREAMP/PROCESSOR 100007.0
Top Page Image Contents